Sorry, it’s been a while since I last posted anything. I have been busy getting our new company off the ground.
My wife spotted a cabinet at Home Sense and took a couple of pictures of it and asked me to make one for our family room to put the DVR and Blue Ray in along with some books and such….
I went back and took a few measurements and got to work.
This is another Palette Wood project. A few months back I found a large palette at a company called Felder Equipment it was 4’ x 8’ and the boards were 4/4 thick. I don’t know what species it was but it cleaned up nice and the price was right.
All I have left to do is the chicken wire in the door, I’m having trouble finding the wright size to look good.
All in I have spent about $25 bucks on this project everything except the crown and the hinges was palette wood and leftovers including the paint.
Comment
Thanks Jay, I appreciate the kind words.
Excellent work on this one Jim. It is amazing how well you take the old reused wood from something made for a different use and build something of beauty. I really appreciate the fact that you recycle what becomes most peoples junk and or firewood. This takes more that just craftsmanship but also an appreciation of what wood really is and the drive and imagination to create from something that was once discarded . Thank you for sharing your work.
Thanks Claude...
My mind is blown with this one. Furnitures having an old feel always get my utmost admiration.
Continue making amazing projects!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community