This was all reclaimed wood from the houses being built in our neighborhood, except for the horizontal board at the top of the back rest. I used a Behr outdoor waterproof stain since most of the wood wasn't treated. I got the plan from Ana White website and modified it a bit for the height of seat.
Comment
Angie (& Ana), Thanks for the Springtime idea. I'm finishing a Mission Coffe Table w/two drawers and the Love Seat is my next. I'll give it to my son as a 55 B-day present and he can finish w/stain. At 82 my time is presious and I need to work fast. You guys are doing great work. Sure wish any of 7 (3 boy - 4 girls) would have the same ambishions. Been a KregJigger for years.
Love it, nice job Angie, I like how you have reused lumber that would have otherwise gone to landfill or used as firewood. well done.
yeah..I found it. Thats a cool site. Way too many neat ideas.
Here is the link for the plans http://ana-white.com/2011/06/simple-white-outdoor-loveseat I did raise the of the seating because it sat so low to the ground. These plans are good to get you going and easy to adjust the height if needed.
how can I get the measurements for the Outdoor Loveseat
Ana has great designs - simple, useful and fun to build!
Great job. I like useing found wood.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community