Kreg Owners' Community

Mobile woodwork bench

My recently (almost 100%) finished mobile woodwork table with tools

  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Steven Baynes on January 18, 2018 at 11:03am

To be honest, the stuff is too expensive here in SA for a JET or Harbor freight dust collector, to us its 12 times the USD so I make all my own stuff!

Comment by Donnie Robinson on January 18, 2018 at 8:55am

Thanks 

Comment by Steven Baynes on January 18, 2018 at 8:30am

Hi Donnie, I built a leaf blower / vacuum motor into a box, the blower is in its own compartment (I forgot to take pictures when we made it) and the suction side has a small air box, all the pipes go into the small air box and the outlet of the blower goes into the inside of the big air filter, we do generator maintenance so I have access to my old stock for things like that. The filter stops the dust and we vacuum it all out every few weeks. The vac system is simple to clean and every few months we just take the lid off and give it a proper clean. The air filter by the way is for a big Komatsu generator set rated at 1 micron. Cheers, have fun!

Comment by Donnie Robinson on January 18, 2018 at 7:13am

Please explain the vac system

Thanks, Donnie Robinson

Comment by Steven Baynes on January 7, 2018 at 7:31am

Thanks Homer, its a blast to work on!

Comment by Homer Moyers Jr on January 3, 2018 at 9:21am

Wow, that is an impressive bench.  

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

Puzzle Caddy/Board

Hello All - I'm looking for a plan for a puzzle caddy to replace the frail cardboard ones we've used in the past...large main area and two smaller sorting/storing trays. If anyone has such a plan or has seen one someplace, I'd love to hear about…Continue

Tags: puzzle, Project

Started by R.J. Foster in Miscellaneous Dec 4.

Edge Joining 2" Boards 1 Reply

Hi Everyone,I appreciate all the threads on the community. I've got to use this more, you guys are great.I got my hands on some beautiful ambrosia poplar, 2 inches thick, that I want to join for a desk/counter top. Using the 2.5 inch screws and…Continue

Tags: joining, edge

Started by brian lazenby in Beginners' Zone. Last reply by Brad Martin Dec 1.

What type screw to use for Black Walnut 2 Replies

I have some 2" x 6" Black Walnut and need some 2 1/2" screws. To best of my knowledge Walnut is a hardwood so I need to use fine thread screws. However I can not find that length of Fine thread screws on Kregs website. Does anyone know where I can…Continue

Started by Duane Heda in Other Kreg® Products. Last reply by Duane Heda Dec 1.

Working in carport? 2 Replies

I share a large shop with a friend at his house, but, for the last couple years I have hardly been there to work on anything.I have moved a lot of the duplicate tools into my carport and have been working there.Does anyone else work in the…Continue

Started by Steven Brown in Miscellaneous. Last reply by Darrell Wertz Dec 4.

Product Reviews

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.

The…

Continue

Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

Kreg K5 Jig Review

Posted by Daris R. on November 20, 2017 at 5:39pm

© 2018   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_