Built to match my knotty pine platform bed
Comment
no sorry jackie...no plan, i made it up as i went along.
Are there any plans for this project?
the drawer boxes are complete and ready for sanding. Think I will route a little piece of trim for the underside of the top to dress it up a bit. I'll use pocket holes to join pieces for the top, sand, finish and they'll be complete. instead of metal slides, i used wood runners and stops. once waxed, they should work great.
I used a couple of really beautiful 1x12 in white knotty pine from the lumber yard to rip almost all the pieces. drawer boxes are 3/4" birch.
unfortunately, i split the legs in 2 places when i screwed into them a little bit hard; had to back out the screws, break the split, then glue, clamp and sand my way through. bought a cool dowel jig awhile back; in the split-then-fixed areas, i just used dowels and glue. looks great :-)
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community