This is an entryway bench that I found on Anna White's website. I modified the plans a little bit. I built one last year when I first started doing the wood working hobby from pine I bought at Home Depot. This one is made from rough oak that I bought from a local sawmill. I used my new Dewalt 734 planer to plane it down. Interestingly the cost was about the same for both. I put some danish oil on it and I plan on applying some rub on poly this weekend. Yeah the basement is very cluttered and messy :) The project itself is pretty easy. I think the hardest part was gluing up the wood to make it 12 inches since the boards were only 8 inches wide. That was very time consuming. I am not good at gluing up either so it was good practice.
Comment
Thank you Jason. I live in central PA and the sawmill I go to is just a local guy that does it as a hobby. Its pretty cheap for walnut, oak, and cherry and whatever else he happens to have at the time at $1.50 a board foot plus if you bring you own logs he will saw them for .34 cents a board foot. I may try one of these in walnut and cherry. This one is for my mother for mothers day. My wife also wants another one made of oak just like this one. I guess I have a lot of work to do. Wood working is way more fun than actually being at work though. :)
Great job! I am building the same thing for a client, but I decided to give dado's a try. I wish I could find a local sawmill that is open on saturdays! She wants it painted white so I went with pine.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community