Kreg Owners' Community

Drawer System

Pretty simple storage solution that maximizes a small space.

  • photo
  • photo
  • photo
  • photo

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Rosemarie Wood on April 16, 2010 at 2:45pm
Nice job, I never thought of using this system the way you did. I have seen it in the gasrage hanging from the ceiling.
Kevin is right, Kreg did make this a lot easier than if you didn't have it.
Comment by Kevin Bosse on April 16, 2010 at 10:30am
Thanks! With the risk of sounding like a commercial, Kreg really did make this easy.
Comment by KregRep on April 16, 2010 at 7:45am
Great storage solution, Kevin! This project was featured on the Kreg Jig Facebook Fan Page.
Comment by Kevin Bosse on April 15, 2010 at 1:31pm
A small alcove coming in from the garage was the perfect spot to add some much needed storage, but, all the systems available at that large organizational store didn't adequately use the space, and cost entirely too much. Some white ash, full extension 100-lb soft close drawer slides and a couple pocket holes made this project come together, and I couldn't be happier with the results. The most expensive part were those fancy baskets (bought at said large organizational store) but all other materials totaled $125, the store-bought system would have hit over 400. Sure I stole their idea, but it was a good one. When you need something they slide right out for easy access, but then go right back and stay out of the way. The hardest part was shimming the supports to account for the not square walls, but building the frames with the Kreg jig took minutes at most. I made one frame wrong (always has to happen) so I beat on it with a hammer to test their strength... I was impressed, these frames are super strong. Thanks for looking, hopefully this will inspire someone else to get rid of some clutter, its easy!

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_