Kreg Owners' Community

Display Case for small seashells

Apart from the usual typos found in mag plans, I didn’t want to spend a few hours making a single purpose jig for the bisquit slots and possibly blowing out some pieces trying to accomodate really small bisquits. So, I used my Kreg jig to join the divider/runners. Besides, I don’t like bisquits anyway. Also, you can see the shims I used to force the back tight against view edge. I have a neat thin strip jig (from the ‘80s) that lets me rip really thin strips.

  • photo
  • photo
  • photo

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Joseph Scharle on April 30, 2010 at 7:58pm
Thank you for all the kind words!
Comment by Beth Fricks on April 30, 2010 at 6:44pm
Beautiful. I would like to build a map case. It would be similar to yours only 3 or 4 times the size. Too many things to make, not enough time!
Comment by Wayne I on April 26, 2010 at 10:58am
Very well done.
Comment by ralph wayne crocker on April 26, 2010 at 9:50am
nice I like it
Comment by KregRep on April 26, 2010 at 8:25am
Beautiful display case, Joseph. Your project has been featured on the Kreg Jig Facebook Fan page!

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_