Built from white pine , stained mahogany, put together with pocket hole screw,s !!! used my k 4 , k 3 and shelf pin guide !!! It is 6' 5" high - 22 1/2 " deep and 48 " wide!! This was my own design,no plans !!!
Comment
Thank,s David , had to scrach my head a few times on this one, HA!
Great work and craftsmenship.
Hi Jay , thank,s for the nice comment on my display cabinet , did put a few day,s into this one to get the slopes, degrees and angles just right !!! Did make the lower three shelf,s adjustable with the Kreg shelf pin guide , also used a lot of kreg pocket hole screw,s for the stationary shelf,s !!! Like the challenge to think up a project and just go with it and see what turn,s out !! Have a great day , JIM !!
Hi Jim, this is a very nice constructed project with a very nice plan. Your work is well executed and a pleasant cabinet to look at. Lots of room and it is very apparant that it took a good amount of work to build this. I like the dememsions as it looks good. There is only one thing, I don't see any white snow in the back ground, but I am certain that will change soon enough. Thanks for posting something that is different.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community