Kreg Owners' Community

Buffet

Got this plan in one of my Canadian Home Workshop magazines (pic2) and thought I would try to build it with pallet wood just used one sheet of ply for the carcase.

Thanks for looking and keep on building….

  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Jim Delorme on December 5, 2012 at 2:36pm

Hi Justin, I used a home made paint recipe for chalk paint that I found online (1 part baking soda and two parts flat latex paint).

You apply with a brush it goes on thick and sand smooth (150 or 200 gr is fine) when its dry followed by Minwax Paste Wax and buffing with a soft cloth.

Try it out on some scrap wood and see for yourself if you like it.

Thanks for looking

Jim

Comment by Justin on December 5, 2012 at 1:53pm

Jim, 

What type of finish did you use for the outside of the buffet?

Comment by OUTSIDER on February 11, 2012 at 8:40am

really nice job.wish we had more people like you using reclaim woods.here in my area the skids are in piles for anyone to have,yet only a few of us use them.keep up your good work.

Comment by Robert Pyburn on February 8, 2012 at 3:31pm

Beautiful work!

Besides helping us out with the plans (website?) how about an article on your experience in reclaiming the pallet wood?

Thank you for sharing!

Comment by angie brashears on February 8, 2012 at 2:40am

love it!

Comment by Daniel J Durkton on February 7, 2012 at 4:27pm

Hey Jim, great job on the Buffet, Were can i get the plans for it ? I would like to make on with knotty pine.Thanks

 

Comment by Jim Delorme on February 1, 2012 at 9:29am

Thanks for your kudos everyone.

Comment by Bill Lanterman on January 31, 2012 at 9:19pm

Lovely job! Nice work.

Comment by Matthew Anderson on January 24, 2012 at 11:06pm

 Where can we find these plans?

 

Comment by Martin Abelon on January 24, 2012 at 10:38am

Great job Jim.

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_