This Stand displays and or, securly holds Colt Navy revolvers to be loaded
Comment
Lowell
Thanks again for the drawings, pictures, and instructions. This is great. I look forward to making one as similar as I can.
Hardy
Hi, Hardy:
I made a drawing, wrote istructions, and took pictures, and then tried to send all in an e-mail. The e-mail came back and said your mail box was the wrong one. I am computer iliterate, and don't know where to go from here, but I tried
Lowell
Lowell
Sure! That would be great! hhobbs@satx.rr.com
Thanks again!
Hardy
As soon as I get a break I'll take some pics., and jot down some dimentions. do you want them in an e-mail?
Lowell
Lowell
Yeah I would love to see close ups and any dimensions you have. I have a colt navy.
Thanks
Hardy
Hi,Hardy:
Sorry about the delay in answering your comment. actually there were no plans for the black powder revolver loading stand. I showed it holding a Colt Navy, but it also will hold a Colt 1860 Army, and the Remington New Army revolvers. As for the plans, I just designed it as I built it. If you would like to build one I would be happy to take some close up pictures and describe it in a little more detail.
thanks for your interest.
Lowell
would love to see the plans for this stand!!!
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community