Kreg Owners' Community

Kreg Jig - workstation and storage unit

Kreg Jig - workstation and storage unit

Portable unit (particle board, 1x4" pine, 1/4" plywood scraps) for the use and storage of the Kreg jig, screws, clamps, bits, etc.

  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Dave Johnson on July 26, 2017 at 2:50pm
Thanks for the reply. Even without a detailed pattern it looks good.
The 22 lb weight would be an issue if using it all the time in different locations.
I've got an 8' rolling bench that I'm planning to use for my miter saw, and possibly incorporating my K5 on the same bench.
Comment by Patrick Hayes on July 20, 2017 at 6:47am

Thank you for your reply

Comment by Mike Henson on July 19, 2017 at 9:50pm

Thanks all, for your interest in my design. I've used the workstation with several projects now and am very pleased with it, but unfortunately there are no plans or sketches since I assembled it more or less spontaneously, completely from available scraps. 

If its any help at all, I can say that its base is 36" long (91.4 cm) and 11" (27.9 cm) wide. The base, top, and 5" (12.7 cm) wide workpiece stage is particle board covered with a faux wood vinyl veneer that is reasonably tough and provides a slick, reasonably impervious work surface. This material is strong, works well, but adds a lot of weight. The entire unit weighs over 22 lbs (10.1 kg), so you might wish to try plywood. The 2" base flanges, with handles, help portability and can be easily clamped to a bench top if you are working with an especially large workpiece. The yard stick remnants mounted below the stage helps with estimating the even positioning of pocket holes in your work piece, quickly and efficiently.

I really like the drawer better than a hinged top, because you have access to accessories even when a workpiece is engaged in the jig. The drawer box and dividers are common 1x4" pine, with a 1/4" plywood false front. I thought about routing grooves in the drawer box for 1/4" dividers, to save room for more accessories in the drawer, but didn't go to the trouble.  Of course, this is an option and might save a little weight. i'll post a couple of more pictures to show close-ups of the drawer, etc.

Hope this helps. Please post pics when you build your versions. I'd like to see your improvements. Best of luck!

Comment by Patrick Hayes on July 19, 2017 at 5:23am

how do i down load the plans pls

Comment by John Tomkinson on July 18, 2017 at 3:28pm

Kreg has a free Project Plan which you can download to make your own storage unit.  I made one in 2014 using the Kreg plan, with a few of my own changes.  Works like a charm.  John

Comment by Dave Johnson on July 18, 2017 at 11:57am
Do you have a pattern for this project? I've seen others and am curious to See If some can be incorporated together.

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Product Reviews

Kreg Mobile Project Center

I just picked up my new Kreg Mobile Project Center Item #KWS1000.

Wow!  I set it up in my basement and it is great addition to my Kreg items.  I was viewing a video where a review on this fine product was being made, which prompts…

Continue

Posted by John Tomkinson on May 5, 2017 at 5:34am — 2 Comments

Handy jig to hold and push plugs in!

Takes 10 minutes to make this handy accessory for your Kreg gear! Home made plug pusher.

Posted by Dave Stanton on March 31, 2017 at 5:53pm — 1 Comment

© 2017   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_