Kreg Owners' Community

Cornhole boards

Made my first set of cornhole boards and it was so easy with my new K5

  • photo
  • photo
  • photo
  • photo

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Floyd K. Smith on September 28, 2017 at 12:41pm

Looks Great Steve! Enjoy them!

Comment by Jax on June 15, 2017 at 3:54pm
Steve, I'm going to try that. Thank you!
Comment by Steve Taylor on June 15, 2017 at 8:28am
Jax, I used a vinyl decal off the Internet and then coated with 9coats of poly acrylic over it all to get a smooth finish sanding after every three turned out great and slick as a baby's butt!!!
Comment by Jax on June 14, 2017 at 9:20am
What did you use for the team mascot? I thought about a decal but I didn't know if it would interfere with the way the bags slide on the board. Any advice or suggestions?
Comment by Steve Taylor on April 15, 2017 at 8:35pm
I pulled the plans off the internet,detailed with sizes of cuts you need for the regulation size and went from there
Comment by Nellie E Rigsby on April 15, 2017 at 6:41pm

Is there any way you would share the plans for your cornhole boards.  My husband and I would like to make a set.

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_