Projects: Shuffleboard table
Join Kreg Owners' Community
See, I am not the only one admiring your craftsmanship Andy!!
I just looked up the Essential hardware website, man they have a lot of products. Was there a category under which the legs you made were found? Did you buy the corner brackets there as well?
Oh yeah - I used Weldwood Contact Cement to glue the vinyl to the box pieces before I built the box. This glue is perfect for this application. It would work on felt of canvas as well.
Sure - I just kinda did it by the seat of my pants. I'll see what I can put together for you.But just as a starter- The box is 25 1/2 x 110 so it would fit the wall. The bottom of the box is 1 1/2 in thick to prevent warping, etc.
I used standard 5 1/2 width common pine to give it a rustic look.
The inside of the box is vinyl - I pinched the ends into the box joins. The paying surface is stained birch plywood (1 1/2 thick) with about 8 coats of poly, I ended up making a new playing surface using no stain b/c my water-slide number decals didn't show up on the dark stain.
I got the legs from Essential Hardware . com.
Wondering if you are willing to share the plans for this project? Also great job I think this turned out amazing.
Welcome toKreg Owners' Community
Sign Upor Sign In
Or sign in with:
For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST).
Added by Ken Steckley
Added by Philip Miller
Added by Alex DrMaster
Started by Dave N in Kreg Jig® Projects yesterday.
Started by Cynthia Alaniz in Beginners' Zone. Last reply by KregCS Sep 19.
Started by Michael B in Kreg Jig® Operation. Last reply by Edward Weitsman Sep 19.
Started by Joe L in General Woodworking. Last reply by Glen S Sep 4.
Started by Al Baker in Beginners' Zone Aug 30.
The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…
Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments
The first thing I will do is set price aside and focus on the tool and why I bought the Domino.
I have orders for a few dining tables and chairs. I have made one prototype chair, while I have all the tools to make angled…
Posted by justin waldron on April 2, 2018 at 5:46am
© 2018 Created by KregRep.
Report an Issue |
Terms of Service
Please check your browser settings or contact your system administrator.