Projects: Shuffleboard table
Join Kreg Owners' Community
See, I am not the only one admiring your craftsmanship Andy!!
I just looked up the Essential hardware website, man they have a lot of products. Was there a category under which the legs you made were found? Did you buy the corner brackets there as well?
Oh yeah - I used Weldwood Contact Cement to glue the vinyl to the box pieces before I built the box. This glue is perfect for this application. It would work on felt of canvas as well.
Sure - I just kinda did it by the seat of my pants. I'll see what I can put together for you.But just as a starter- The box is 25 1/2 x 110 so it would fit the wall. The bottom of the box is 1 1/2 in thick to prevent warping, etc.
I used standard 5 1/2 width common pine to give it a rustic look.
The inside of the box is vinyl - I pinched the ends into the box joins. The paying surface is stained birch plywood (1 1/2 thick) with about 8 coats of poly, I ended up making a new playing surface using no stain b/c my water-slide number decals didn't show up on the dark stain.
I got the legs from Essential Hardware . com.
Wondering if you are willing to share the plans for this project? Also great job I think this turned out amazing.
Welcome toKreg Owners' Community
Sign Upor Sign In
Or sign in with:
For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST).
Added by Philip Miller
Added by Jeremy Schoales
Started by Lloyd V. Robichaux, Jr. in Beginners' Zone. Last reply by KregRep 8 hours ago.
Started by Glenn Scott in Beginners' Zone. Last reply by Brad Martin yesterday.
Started by Vince in Beginners' Zone. Last reply by KregRep Jul 9.
Started by Scott in Beginners' Zone. Last reply by Tim Grace Jul 11.
Started by Jeff Thomas in Beginners' Zone Jul 5.
The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…
Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments
The first thing I will do is set price aside and focus on the tool and why I bought the Domino.
I have orders for a few dining tables and chairs. I have made one prototype chair, while I have all the tools to make angled…
Posted by justin waldron on April 2, 2018 at 5:46am
© 2018 Created by KregRep.
Report an Issue |
Terms of Service
Please check your browser settings or contact your system administrator.