Kreg Owners' Community

Rating:
  • Currently 0/5 stars.

Views: 127

Projects: MY Porch Swings& outdoor Furniture
Favorite of 1 person

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Jerry Alfaro on March 21, 2010 at 11:28pm
That is a nice swing Larry, you do very nice work. Thanks for posting.

jerry-
Comment by Mark on March 21, 2010 at 10:30pm
Hey thanks any way.....still a very nice swing!!
Comment by Larry Barnett on March 20, 2010 at 8:24pm
Mark
I use "KDT" yellow pine, KILN DRIED AFTER PRESSURE TREATED. Some contractors call it yellow wood because it doesn't have the green color the old pressure treated wood has. I buy 5/4 decking boards 12 ft long and 2x8' to cut out the frame members and arms. I use wood templates that I made a few years ago and my plans are so faded you can't read them any more. I know all the measurements from building them in the past. i wish I had a set of usable plans I could send you. Sorry.
Comment by Mark on March 20, 2010 at 3:39pm
Larry,
That's really nice. My wife want's me to build one. Do you have any extra plans? What kind of wood did you use.
Any advice or help would be appreciated.
Thanks.....Mark

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_