Join Kreg Owners' Community
You can make a wedge---
suggest make it from maple.
BTW---you may want to make two such wedges---
One for thinner material and
another for clamping thicker objects.
(I have 3 different size wedges).
Make them with a small slope (low angle)---
too large a slope, will not provide a good solid grip, as it may easily be dislodged.
You want the wedge to have max surface contact with the leather pads, for max grip to avoid easily dislodging.
NOTE---don't lube the wedges surfaces.
You want max friction, during the clamping/holding operation.
Dont' make the wedge too long---as it may easily become dislodged during use.
This clamping tool can come in very handy for some shop tasks.
Sometimes I use two such tools to clamp some objects.
Thank you very much Ken. Yes the wedge is missing .
Clamp shown with "wedge"
Clamping pressure is applied with a wedge placed into the opp end of the tool.
(The photo you posted, of the tool, doesn't contain a wedge. Perhaps it got separated and lost,
or the person threw it away and didn't know the wedge was needed for the tool).
The ring is placed into the padded jaws---the wedge in inserted into the opp end of the tool,
tapped in tight enough to hold the ring in place.
The leather pads protect the ring material from getting marred.
The older models were made of wood, then followed by it made from a plastic material.
It doesn't have a spring in the middle .It just rocks back and forth. How does it clap.
Thank Ken . No one I've talked to has ever seen it. It will be a good conversation piece.
It's a jewelry makers ring clamp.
Does any one know what this item is? I found it at a used item store.
Welcome toKreg Owners' Community
Sign Upor Sign In
Or sign in with:
Technical Support is happy to help via phone or email. Call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST).
Added by Jeremy Schoales
Added by Barry Cox
I just picked up my new Kreg Mobile Project Center Item #KWS1000.
Wow! I set it up in my basement and it is great addition to my Kreg items. I was viewing a video where a review on this fine product was being made, which prompts…
Posted by John Tomkinson on May 5, 2017 at 5:34am — 2 Comments
Takes 10 minutes to make this handy accessory for your Kreg gear! Home made plug pusher.
Posted by Dave Stanton on March 31, 2017 at 5:53pm — 1 Comment
© 2017 Created by KregRep.
Report an Issue |
Terms of Service
Please check your browser settings or contact your system administrator.