Kreg Owners' Community

Rating:
  • Currently 0/5 stars.

Views: 277

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by michael evans on November 28, 2015 at 3:17pm

Thanks for taking the time to reply John, never seen the like of the blade runner before so i was curious. It sounds like your a fan of this saw ,here in the U.K not so much choice with tools like this .Go steady Mick.

Comment by John Tomkinson on November 28, 2015 at 10:23am

Always happy to share info with my fellow Kreg Members....Regards, Michael, from Western Canada!  John.  Michael, this is a photo of my original Bladerunner sitting on its Wall Mount attachment.  And the cedar wall sections were all cut with this unit.....it did a beautiful job!

Comment by John Tomkinson on November 28, 2015 at 10:17am

Hi, Michael.  Yes, this Rockwell Bladerunner X2 uses T-shank blades and comes with 5 different styles of blades that can cut through metal, PVC, plastic, tile, etc.  Please look at the photos I posted, and you will see where I used my Kreg HD Pocket Holes to assemble many of the wood sections in my carport/workshop upgrade.  Check out YouTube videos to see the Rockwell Bladerunner.  The original Bladerunner [which I also have] had an arm support, off to the right of its table, which restricted the width of wood your wished to cut.  The newer version, the Bladerunner X2 has eliminated that side arm, and you can do rip cuts straight on thru....the space made with your cutting blade is enough to slide your cutting sections thru the narrow upright support at the rear of its table.  These are wonderful units for the DIY'er, because they can even cut your 2x4s [1.5 inches], and you can use other T-shank blades besides just the Rockwell ones, ie:  Bosch, etc.  You can use its Scroll blade to make scroll cuts, although not perhaps as 'perfect' as a dedicated Scroll Saw.  The beauty of this handy little unit is that it frees up both of your hands to control the piece you wish to cut.  You can also get a wall attachment if you don't have a bench access.  Hope this helps with your question, Michael.  Happy Kreg-ing!  John

Comment by michael evans on November 28, 2015 at 4:29am

Hi John is that a scroll saw?

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

Missing clamping table project 3 Replies

Started by Brandon B. in Beginners' Zone. Last reply by jock sloan 7 hours ago.

90 gallon aquarium stand

Started by Glenn Gilbert in Community-Specific Jun 11.

Proper clamping technique 1 Reply

Started by Ron Salgado in Kreg Jig® Operation. Last reply by KregRep May 31.

Edge joining 3/4 inch plywood 2 Replies

Started by Lynn Greff in Beginners' Zone. Last reply by Lynn Greff May 20.

Where can I get a K3 owners manual.... 3 Replies

Started by John Chasse in Beginners' Zone. Last reply by John Chasse May 19.

Product Reviews

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

© 2018   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_