by Patrick Halinski
Dec 30, 2023
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much.
Thanks.
Cancel
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
by Patrick Halinski
Dec 30, 2023
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much.
Thanks.