Kreg Owners' Community

Forum Discussions (3,308)

Discussions Replies Latest Activity

Two more 99% Kreg projects done .

Just off the table a vinady chair and Fish tank stand and you lose one piont for hardware.

Started by David Dean in Kreg Jig® Projects

0 Dec 9, 2011

Depth Collar Slipping

I would like to see a flat spot on the shank of the bit to keep the collar from slipping while drilling. this has happened 2 times even tho…

Started by James Pittman Jr. in Miscellaneous

9 Dec 8, 2011
Reply by James Pittman Jr.

Table saw fences

Is anyone out in the woodworking country using a Vega fence and if so what are pros and cons. I  might get opportunity to purchase a used o…

Started by Jens Jensen in General Woodworking

0 Dec 8, 2011

drop in stove cabinet

has anyone built a cabinet for a drop in stove and oven

Started by gary kinney in Kreg Jig® Projects

1 Dec 7, 2011
Reply by Jay Boutwell

Toy Box Wagon

Most of you have probably seen the plans for these.  I have done some slight variations of the plans and made (IMHO) some improvements on i…

Started by Gene Frenkle in Kreg Jig® Projects

3 Dec 7, 2011
Reply by KregRep

Band Saw Question

Hello Folks, i'm looking at a 14" band saw purchase, uses will be resawing up to 8" (I know I'll need a riser block for some) and curves et…

Started by Kerry Werry in General Woodworking

3 Dec 6, 2011
Reply by Kerry Werry

Using kregg jig to put together a top measuring 20 inches by 75 inches. Wood is birch and is about 2 3/4 inches wide

The top is 1 inch thick. My question is.  Is it feasible to use the jig to do this project, and if anyone has done something like this befo…

Started by Bruce W Phillips in Kreg Jig® Operation

3 Dec 6, 2011
Reply by Bruce W Phillips

Glue Guide

hello, please explain the open time and clamp time in the glue guide

Started by W. Lawrence in Beginners' Zone

2 Dec 4, 2011
Reply by John Schaben

Help - I need to raise workbench to match height of other workbench

As my first Kreg project I am building the workbench as per the project plan page. I made a mistake with the leg heights and having complet…

Started by Gerard Doyle in Beginners' Zone

17 Dec 3, 2011
Reply by Dean Hartley

Face Frame Width

Through a little research I have found that a 2" wide face frame seems to be the most popular. Can anyone tell me why that width is popular…

Started by Eric Theriot in Beginners' Zone

6 Dec 3, 2011
Reply by Steve

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_