Kreg Owners' Community

Hi, I'm new to this forum and have a question. I'm building a small entertainment center for our LCD TV and components. I am building a 4 inch tall base that has mitered cuts (some are 22.5 degrees) because it is sitting in a corner at an angle. Don't know if I'm explaining this right, but is it possible to use pocket holes to join vertical miter cuts as opposed to 'picture frame' style miters? In a test that I did, the pocket hole severed through the miter cut and just left a groove in the wood.

Views: 88

Reply to This

Replies to This Discussion

I'm not an expert at this type of stuff... but this information from Kreg's YouTube profile might be helpful to you.

I build a lot of cabinets nd entertainment centers. sometimes,keeping it simple,is easier and faster. Start by making a base that will be covered with finish material. Base material can be plywood.2x stock,1x stock,whatever you choose. once the base is made,cover the base with finish material,that matches your project.This way you can cut,miter,but joint,whatever,and air nail the trim pieces onto the base.
Here's a bit more in-depth information on this topic:
Thanks everyone for your replies. Once I figured out how to do these angles, it was magical how well they come out. I do have a suggestion for the Kreg people though. On your video, you don't follow through on the next step of trimming the excess board when doing odd angles. I didn't realize this until I read the actual instructions rather than watching the video. I thought that the video was showing a decorative woodworking technique that had that overhang intentionally. I wonder if other people see the same thing. Anyway, now that I have figured it out, it really is remarkable how you can get a near 'seamless edge'.

KregRep said:
Here's a bit more in-depth information on this topic:
I have to agree with John about the Kreg video, I just built a corner cabinet and was somewhat confused by the video. It wasn't until I read the post from the Kreg rep that I was able to figure it out. I also thought the overhang was some sort of design.
I don't believe you can

Reply to Discussion


Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 


  • Add Videos
  • View All


LED Lighting on mobile bench

Started by Steven Baynes in Miscellaneous Oct 8.

Ridgid tools 1 Reply

Started by steve kidd in Beginners' Zone. Last reply by Glen S Oct 9.

Cabinets and the best wood choice for the carcass. 3 Replies

Started by Stephanie H in Kreg Jig® Projects. Last reply by Glen S Oct 2.

1x6 into a 4x4? 4 Replies

Started by Dave N in Kreg Jig® Projects. Last reply by Edward Weitsman Sep 29.

Rip-Cut Ruler 5 Replies

Started by Cynthia Alaniz in Beginners' Zone. Last reply by Glen S Oct 2.

Product Reviews

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…


Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…


Posted by justin waldron on April 2, 2018 at 5:46am

© 2018   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service