Kreg Owners' Community

Hi everyone , I want too make a mobile table saw cart with some storage .My dewalt tablesaw came with a stand but it takes up to much room in my little 12x12 shop .Will probably have a fold down extension wing on the left ,anyone made one ? The cart will be 2feet x 2feet square approx. Any pictures would be great .

Views: 331

Reply to This

Replies to This Discussion


             derek kieller posted a cart he made for a planer/thicknesser it has a fold down side and everything might give you some ideas or at least somerwhere to start. the bench i built will be too long for your shed.


Thanks jock how you doing ?Have you got arm ache yet holding that massive beer glass up ha .

Michael, Here are some pictures (Facebook link, you don't need an account to view) of the one I made.  I have a one car garage.  The mobile work station houses my table saw, miter saw, router table and Kreg Jig station in one.  I need to post more pics of the finished product.  To give credit where credit is due, below my post is the LumberJocks project I used for reference.  

Mine (in progress, it's done now, you get the idea):


Good luck, this is really, really handy.  

Here is the table saw cart I built. I also attached my Ryobi router table to the end of it. It's a little bigger than you are looking for but it might give you some ideas. The base is made of  2x4s and the sides and shelves are MDF. I also added a face frame to dress it up a little. The base is on locking casters. All parts are joined with glue and pocket holes.

Hi Justin many thanks for the photos ,i have now got a seed planted in my mind what I want to do .Will make of 3/4 ply measureing 20" square with a drop down leaf on the left side .Soon as I have finished this bathroom remodel I will be on it ,go steady mick.

Hi nick thanks for the pics ,a picture speaks volumes .Like your set up with the built in router table .Now I know what I am aiming for thanks ,mick.

Reply to Discussion


Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 


  • Add Videos
  • View All


K4 Jig Clamp Screw 4 Replies

Started by John Bilton in Beginners' Zone. Last reply by Glen S on Thursday.

Cabinet construction 3 Replies

Started by Michael B in Beginners' Zone. Last reply by Reg Craft 7 hours ago.

Calculating Screw Penetration Depth 1 Reply

Started by Ken Kortch in Kreg Jig® Operation. Last reply by Ken Kortch Mar 11.

Finishing, what works for me

Started by justin waldron in Beginners' Zone Mar 4.

Product Reviews

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.



Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

Kreg K5 Jig Review

Posted by Daris R. on November 20, 2017 at 5:39pm

© 2018   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service