Kreg Owners' Community

What is the best table saw under $300?

Views: 1441

Reply to This

Replies to This Discussion

Only option in that price range Craig list best buy.

Here is an example from my area http://fingerlakes.craigslist.org/tls/5601828658.html

John

While Gary provides one option, I used a small Skil brand table saw for many years. I was fortunate to find an upgrade table and fence for it which allowed a larger surface area and larger rip capacity fence, but I've seen many of these small saws built into larger tables. The biggest drawback to my previous unit was the inability to use a wide stacked dado set and the miter slots were smaller than full size saws, meaning many aftermarket accessories will not work.

I'm not advocating the small saw over a larger contractor or cabinet saw, but if its your only option available, you can still work with it.

Don

John,

this is what the table and fence I mentioned looks like. The portable saw drops into the opening and is adjusted by levelers to be flush with the table.

Don

Attachments:
I use a table saw I purchased from ace hardware. I made an extension to catch long boards

I have been using a Dewalt compact job site saw for past 4 years. Just over $300 @ Home Depot ($379). Place it on work bench shelf and table becomes out feed . Would work for you if your budget can handle it.  Look at my profile for pics of bench and saw.

Check out the local pawn shops, as well. I've run across some pretty nice job site saws for $150 and under. (DeWalt, Rigid, Makita)

 

I've owned the small Skil table saw that others have mentioned and its done my OK for years.

Amazon.com lists a Dewault job site saw for $299 with free shipping. I would suspect that saw would be better than the Skil saw, but you'll need to build a stand for it - a great chance to use your Kreg Jig to build a simple table out of scrap 2x lumber. It'll also likely be more stable than the Skil saw stand anyway.

Here is a link to a nice simple stand that Scott Aldridge shaired on this forum:

http://kregjig.ning.com/xn/detail/2900167:Comment:546055

Better yet (my opinion only because most of my power tools are reconditioned Bosch products from this place and I've really liked them ... they may have a few scratches, but no biggie), you can get a reconditioned Bosch jobsite saw for $299 with free shipping from here:

http://www.cpotools.com/factory-reconditioned-bosch-gts1031-rt-10-i...

For another $20 the same source sells a reconditioned Dewault with a better rip width:

http://www.cpopowertools.com/factory-reconditioned-dewalt-dwe7480r-...

I'm sure both the Bosch and Dewault are excellent quality.

Kobalt 15-Amp 10-in Table Saw

kobalt table saw portable and very easy to put together great buy in my opinion read the reviews did very well and its under 300 bucks. Its perfect for someone that doesn't have a big area to work in folds up nicely and  is easy to maneuver to where ever you are working. 

Mr. C. Lenz makes a good point. I would add that if this is your first table saw that you make it as simple as possible. You can add features of your own as your skills grow. The biggest thing with any saw is the blade being used. It does the actual cutting, All steel teeth blades are cheaper, but do not make the best cuts. Blades with carbide tips are much better but can cost much more. No matter your decision on the model or type become familiar with the safety features thoroughly before getting too eager to do a project that matters. The purpose is to get straight cuts that are accurate to get the best fit possible. Good luck and enjoy the adventure.

Hi

I always search for the old cast iron larger tools like the table saw, planers and thicknesers as well as band saws. Pick them up for next to nothing and they are quality. Never wear and if the motor goes just put in a new one. And boy, they are as steady as. Just love them 

I have this table saw. Very handy to fold up to store and open up to use. Seems to have plenty of power.

drawbacks include the flimsy rip fence and miter. Will be building a crosscut sled for it soon.

Christopher L Esteb said:

Kobalt 15-Amp 10-in Table Saw

kobalt table saw portable and very easy to put together great buy in my opinion read the reviews did very well and its under 300 bucks. Its perfect for someone that doesn't have a big area to work in folds up nicely and  is easy to maneuver to where ever you are working. 

Reply to Discussion

RSS

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

What's On Your Wish List? 1 Reply

Started by KregRep in Community-Specific. Last reply by Brad Martin 20 hours ago.

attaching track saw to Kreg Rip-Cut 1 Reply

Started by A Kain in General Woodworking. Last reply by KregRep on Tuesday.

Full size bed 2 Replies

Started by Bigchief in Beginners' Zone. Last reply by justin waldron Nov 11.

Router Table Cabinet 2 Replies

Started by Steve Mitchell in General Woodworking. Last reply by Steve Mitchell Nov 7.

PVC Mouldings 3 Replies

Started by douglas E. Cooper in General Woodworking. Last reply by Don Foley Nov 6.

Product Reviews

The Pocket Hole Joinery Book - Review

Posted by Daris R. on October 17, 2017 at 11:00pm

Kreg Mobile Project Center

I just picked up my new Kreg Mobile Project Center Item #KWS1000.

Wow!  I set it up in my basement and it is great addition to my Kreg items.  I was viewing a video where a review on this fine product was being made, which prompts…

Continue

Posted by John Tomkinson on May 5, 2017 at 5:34am — 2 Comments

© 2017   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_