Kreg Owners' Community

Aside from Kreg Tracks what other tracks can be used to make a clamping table? If so where can I purchase them? I own a many Kreg products but their tracks are a bit too pricey. Finally, which Kreg clamps are the most useful with the clamping table? Thanks all! -Nick:-)

Views: 6177

Reply to This

Replies to This Discussion

Of course you don't have to use Kreg clamps. Kreg is pricey and there are many options out there in both clamps and tracks. They will all work pretty well. If you are going to use Kreg use all Kreg. If money is an issue you can make that happen too.

Thanks for the link to "ttrackusa" i didn't know about that one.

John Schaben said:

I recently purchased the Kreg master jig, and made my first two projects - a outdoor chair from the website, and a much needed 2nd workbench for my small shop.  I also invested the $44.00 (at woodcraft) for the Klamp Trac and intend to install it into 3/4" Ply as recommended before I put my final top piece on.  I wish it came in a shorter length other than 33" however.  I wouldn't mind having one down the back of bench, and two down the sides.  It would make assembly of some projects much easier.  Is the track available in shorter lengths, and if not can it be cut, and what would you cut it with????   Thanks,  Phil

 

Phil,

 The Kreg Klamp 33'' length is ideal for a 36 x 36 work top,

that's why its 33".

  You only need up to 2 tracks on a work top.

Locate one along the front and one along one side of the work top.

  The Klamp can be used individually, so as to make your own klamping work station, to suit your projects and needs.

  The track can be---

''cut to length'':

Use a metal cutting fine 24-32 tooth blade---

in a bandsaw or jigsaw.

It can also be cut on a table saw,

using a fine tooth carbide blade.

  ''Scribe'' a cut line, along the top face and both vertical faces---

make the cuts at a ''slow speed"---

use a slow feed---

let the blade do the cutting work---

DO NOT force feed.

  The cut end can be filed smooth, using a mill file, to remove the saw marks.

Sanding the saw marks is an alternate---

use sanding paper/grit, suitable for metals. 

Philip King said:

I recently purchased the Kreg master jig, and made my first two projects - a outdoor chair from the website, and a much needed 2nd workbench for my small shop.  I also invested the $44.00 (at woodcraft) for the Klamp Trac and intend to install it into 3/4" Ply as recommended before I put my final top piece on.  I wish it came in a shorter length other than 33" however.  I wouldn't mind having one down the back of bench, and two down the sides.  It would make assembly of some projects much easier.  Is the track available in shorter lengths, and if not can it be cut, and what would you cut it with????   Thanks,  Phil

 

Photos of any homemade Klamp tables along with spec, tips and techniques--please.

Nick,

Do a search in Kreg's forums, several have been posted.

Nick Marchione said:

Photos of any homemade Klamp tables along with spec, tips and techniques--please.

Ken,

Yes, there were a good ideas. Thanks!

I am a novice but Rockler universal track seems to be claiming to work with Kreg clamps.  Can anyone clarify?

Rockler has 2 kinds of tracks for clamping down -- light and heavy duty.  So it depends on how big your clamp is.  Those long reach Kreg clamps need HD tracks.

Maybe the Kreg Rep can weigh in on what tracks are needed for their clamps.

Rick said:

>>>...Rockler universal track seems to be claiming to work with Kreg clamps.  Can anyone clarify?  /p>

Where did you obtain the info?

Is it described in Rockler's product catalog?

Have you spoken to Rockler Customer service?

==========

Image of Rockler Universal T-track

Universal T-Track

Image of Kreg Klamp Track configuration

Note the track configuration--- the channel in the bottom-side of the track.

(the photo shown is 180 from it's normal attitude).

The track shape is configured to accommodate this style of Kreg Klamp

Kreg Large Bench Clamp, 6'' Reach

Note the screw-head, in the foot.  It's intended to be inserted into the track, described above,

(the Kreg Klamp Track). 

The screw-head will NOT fit into a "univeral track", that is of light-duty construction.

I don't believe the Kreg Klamps were ever intended to be used in ''light-duty" tracks.

Clamping forces, on HD Kreg Klamps, will distort the "light-duty" universal track,

and perhaps pull out the #6 track mounting screws from their anchor point(s).

The high clamping forces will cause the light-duty tracks be lifted from the worktop.

Universal t-tracks (light-duty) are intended for such clamping as:

48'' Universal T-Track with Hold-Down Clamps

or the like.




Great post Ken.  I have that big hold-down clamp, and I use it with a large clamp plate. 

Thanks Rick.

I use both size bases---they are the cat's pajama's, so to speak.

Handy to have the small base installed in the 2x4 section, in sawhorses.

One in the center, and one on each end suffices nicely for some tasks.


Rick said:

Great post Ken.  I have that big hold-down clamp, and I use it with a large clamp plate. 

.../p>

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Kreg Accu-Cut and Rip-Cut 4 Replies

First off tried to mention all this to Kreg via Email and just because I live outside the USA seems that the system does not work as they say phone number invalid, which is not.OK bought a Accu-Cut and set it up no problems there worked OK both…Continue

Started by Kenneth J Hunt in Other Kreg® Products. Last reply by Kenneth J Hunt on Wednesday.

Router bits 4 Replies

Tungsten carbide? Skill level is beginning woodworker

Started by MINICOOPERUSAF in Beginners' Zone. Last reply by Tim Grace on Monday.

R3 part

hi all can anybody help got r3 for Xmas and I have noticed that the gray tabs are different think somebody  in assembly was talking the piss day and I have 1 metric side and imperial side so they don’t match up hellllp plzericContinue

Started by Eric Kershaw in Beginners' Zone Jan 8.

Having issues with K5 5 Replies

I watched the setup videos, searched for information and spent half a day and can not get the clamp to hold.i tightened up the screws underneath in various stages up to fully tightened, makes no difference.I do not get the two clicks and I can slide…Continue

Started by Todd Caldwell in Beginners' Zone. Last reply by Glen S Jan 7.

Product Reviews

Merry Christmas r3

 Hi all Santa left me one under the tree the elf thar made it must have had a bad morning because one gray tab is metric and the other one is imperial help Santa what do I do

thanks Eric 

Posted by Eric Kershaw on January 8, 2019 at 6:27pm

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.

The…

Continue

Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_