Kreg Owners' Community

I am installing a Kreg fence on my Kreg router table.  The bit opening is a couple of inches right of center.  With this setup, I won't be able to use a very big bit.  Did anyone else experience this?

Views: 233

Reply to This

Replies to This Discussion

Hi Jack a picture would help with your explanation give everyone a better idea what your up against go steady Mick.

Hi Jack.  Your best bet is to contact Kreg Technical Support directly by calling 800-447-8638 or by going online: https://www.kregtool.com/customer-service/default.aspx?source=1677.  They are very knowledge and will be able to answer any questions you may have regarding your Kreg Precision Router Table and Fence.  Thanks. 

Here are some pics to better illustrate my concern

Hi jack looks like a manufacture problem to me maybe one that got thru quality control unnoticed . Contact Kreg only way to go .

Thanks to everyone that provided input.  Turned out to be an user error.  I had put the fence mount on backwards.  Let's go routing boys.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_