Kreg Owners' Community

Anyone have experience with attaching the Rockler dust bucket to the Kreg router table? Its designed attachment points interfere with the cross braces and leveling ears under the table.
Rob

Views: 96

Reply to This

Replies to This Discussion

I haven't had this specific problem but it sounds like you need to make a flange/spacer between the bucket and the table. Maybe made from two or three layers of plywood. This wouldn't be the first time for such a modification.

Thanks Trace.  Great minds think alike.  I did in fact build a plywood base that stands off from the leveling corners.  I drill ed a couple of holes through the center braces to hang it from.  It is a great set up because suction comes from behind and also below the bit, especially helpful when routing a large dado.  Anything that doesn't get sucked out the hose falls into the box and the door makes it easy to reach in.  It's really a great system.  Rob

The dusty deputy was my choice works well but  cheaply made should buy the heavy duty. It falls a part apart  held together like tupper ware after awhile the joints fail. I will look today at upgrade thanks to your post, Dusty deputy probably works better .

Reply to Discussion

RSS

Need Help?

Technical Support is happy to help via phone or email. Call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Product Reviews

Laguna 14BX Band Saw

Posted by Tim Grace on December 20, 2016 at 1:52am — 1 Comment

Kreg mobile project center

Posted by Gary roofner on November 21, 2016 at 10:00am — 8 Comments

© 2017   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_