Kreg Owners' Community

Anyone have experience with attaching the Rockler dust bucket to the Kreg router table? Its designed attachment points interfere with the cross braces and leveling ears under the table.
Rob

Views: 165

Reply to This

Replies to This Discussion

I haven't had this specific problem but it sounds like you need to make a flange/spacer between the bucket and the table. Maybe made from two or three layers of plywood. This wouldn't be the first time for such a modification.

Thanks Trace.  Great minds think alike.  I did in fact build a plywood base that stands off from the leveling corners.  I drill ed a couple of holes through the center braces to hang it from.  It is a great set up because suction comes from behind and also below the bit, especially helpful when routing a large dado.  Anything that doesn't get sucked out the hose falls into the box and the door makes it easy to reach in.  It's really a great system.  Rob

The dusty deputy was my choice works well but  cheaply made should buy the heavy duty. It falls a part apart  held together like tupper ware after awhile the joints fail. I will look today at upgrade thanks to your post, Dusty deputy probably works better .

Reply to Discussion

RSS

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

Can deck jig fastening limit heat expansion? 1 Reply

Started by Glenn Scott in Beginners' Zone. Last reply by Brad Martin 7 hours ago.

Clamp assemblyr 1 Reply

Started by Vince in Beginners' Zone. Last reply by KregRep Jul 9.

Holding 2 pieces together 1 Reply

Started by Scott in Beginners' Zone. Last reply by Tim Grace on Wednesday.

Cabinet hardware jig knurled nuts loose

Started by Jeff Thomas in Beginners' Zone Jul 5.

Portable Thickness Planer 4 Replies

Started by Tony Smith in General Woodworking. Last reply by Tony Smith yesterday.

Product Reviews

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

© 2018   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_