Anyone have experience with attaching the Rockler dust bucket to the Kreg router table? Its designed attachment points interfere with the cross braces and leveling ears under the table.
Rob
Tags:
Thanks Trace. Great minds think alike. I did in fact build a plywood base that stands off from the leveling corners. I drill ed a couple of holes through the center braces to hang it from. It is a great set up because suction comes from behind and also below the bit, especially helpful when routing a large dado. Anything that doesn't get sucked out the hose falls into the box and the door makes it easy to reach in. It's really a great system. Rob
The dusty deputy was my choice works well but cheaply made should buy the heavy duty. It falls a part apart held together like tupper ware after awhile the joints fail. I will look today at upgrade thanks to your post, Dusty deputy probably works better .
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service