What are the benefits of having one of these in your shop? I have a 12" dewalt sliding miter saw. I have never used a radial arm saw before, so I thought I would ask. Looks like mounting a dado blade you could use to make drawers and stuff pretty easy? If you have a radial arm saw, what do you like using it for? Thanks for any replies.
Tags:
If you have an older older craftsman 10 RAS you should see this, you'll like it..
http://www.youtube.com/watch?v=WgjxwvHf9To
Leonard
Hi Jerrod, read my post under radial arm saw vs table saw for some information about radial saws.
Thanks for the link Ken, and thanks for the heads up Jay, headed there now to see what you put.
Don't waste your money on anything other than a pre- 1960ish DeWalt radial arm saw. It will have a rounded top on the arm.
If you want to buy new, the Original Saw Company manufactures new radial arm saws from the original DeWalt castings.
I have a small 9" MBF DeWalt RAS and love it. With a Forrest negative hook 8" blade, Forrest 8" Dado stack, and a Mr. Sawdust Table, the sky's the limit. if you have any other questions, please post.
Also, check out the rebuild process this guy went through on the same saw I have:
Jason
Old Florida Woodworks
I found a recall saw for $100. Do you think that's a good deal?
Leonard Doty said:
If you have an older older craftsman 10 RAS you should see this, you'll like it..
http://www.youtube.com/watch?v=WgjxwvHf9To
Leonard
I personally would stay away from it, and look for an old DeWalt, models MBF, GWI, MB, etc. Whatever older machine you're thinking about, check over on OWWM for manuals and such. There's a wealth of knowledge there.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service