Kreg Owners' Community

Looking for some R 3 Mini Biscuits made by Wolfcraft , hard to find , used to get them from the s store in a bag for $7.00 now they want $12.00 for the same amount  ( 90 ) biscuits in a cheap plastic jar !!  Thanks ahead for any help , JIM !!

Views: 111

Reply to This

Replies to This Discussion

James,

If you need just a few of them,

cut them from a larger size biscuit,

using a utility knife.

Ken thanks for your reply , do use a lot of them on pic. frames and small boxes that I build , also have the bigger cutter for the bigger project,s and can buy the biscuit,s  # 0 - # 10 and #20  in bags of 500 almost any where, the mini biscuits are nice for the small frames, JIM !!

James,

The Wolfcraft brand is sold at Sears.

The "FF" (mini) is marketed by Bosch and Porter-Cable, sold thru Amazon, 

as well as Tools-Plus.

Ken , that is the store I was talking about , just did not want to pay an extra $5.00 for a plastic jar I would end up throwing away, and the ff are different will not work , thanks , JIM !!

James,

Wolfcraft operates as a manufacturer and supplier of tools and electrical tool accessories.

Hardware stores and dealerships are among there customers. 

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_