Tags:
Your clamps may be defective, Marcus. Please contact Technical Support at toll-free 800-447-8638 or technicalsupport@kregtool.com for help troubleshooting.
Your clamps may be defective, Marcus. Please contact Technical Support at toll-free 800-447-8638 or technicalsupport@kregtool.com for help troubleshooting.
Your clamps may be defective, Marcus. Please contact Technical Support at toll-free 800-447-8638 or technicalsupport@kregtool.com for help troubleshooting.
Marcus,
Have you tried "Dri-Lube"?
A spray-on material---dries rapidly and leaves a thin dry film of lubricant.
It works for me and has many uses in my shop.
I just received one Automaxx clamp included with the Mobile Center. I've tried clamping it down, but literally can't do it. Also tried adjusting the black screw all the way, both ways, with no effect.
I've got half a dozen other style Kreg clamps and know these work differently, but this just doen't see right.
I've even watched YouTube videos hoping I would find something I was not doing properly, but it seems awfully simple.
Any thoughts?
Mike Reese said:
I just received one Automaxx clamp included with the Mobile Center. I've tried clamping it down, but literally can't do it. Also tried adjusting the black screw all the way, both ways, with no effect.
I've got half a dozen other style Kreg clamps and know these work differently, but this just doen't see right.
I've even watched YouTube videos hoping I would find something I was not doing properly, but it seems awfully simple.
Any thoughts?
I have the 90 degree automax, and recently built a furniture, Using solid 2x6 pine, I too am unable to clamp. Actually, I managed to clamp it only once using EXTREME force, only to destroy the pocket hole. My lumber is 1 5/8" thick as opposed to the more common 1 1/2". Could the extra 1/8" in thickness cause the problem?
Kreg customer service contacted me and sent out a new clamp. I slid the replacement into the rail, and it clamped down just as it shows. Works great and I am totally impressed with Kreg Co. and their customer service!
Mike Reese said:
I just received one Automaxx clamp included with the Mobile Center. I've tried clamping it down, but literally can't do it. Also tried adjusting the black screw all the way, both ways, with no effect.
I've got half a dozen other style Kreg clamps and know these work differently, but this just doen't see right.
I've even watched YouTube videos hoping I would find something I was not doing properly, but it seems awfully simple.
Any thoughts?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
Mike- Your clamp may be defective. Please contact Technical Support at toll-free 800-447-8638 or technicalsupport@kregtool.com for help troubleshooting.
Thanks,
KregRep