Kreg Owners' Community

I recently purchased the precision band saw fence and mounted it to a 14" Jet Band Saw. My concern is that when I push to fence back toward the saw arm (away from the blade and to my left) when it travels past the edge of the saw table, the fence hangs downward as there is nothing to hold it tight against the rail to prevent this. This particularly annoying when working with a wide piece of stock where I need the extra depth.

Am I the only one this problem? It seems to be a design flaw as the fence should be attached to the rail using t-bolts.

Views: 179

Reply to This

Replies to This Discussion

Hi sawdustguy. Sorry to hear you are experiencing with your Kreg Precision Band Saw Fence. Please contact Kreg Technical Support by calling 800-447-8638 or by going online: https://www.kregtool.com/about-us/news/company-news/kreg-technical-.... They are very knowledge and will be more than happy to assist you and offer their best advice. Thanks!
KregRep

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_