Kreg Owners' Community

I just built this desk this past week, wanted to fill the pocket holes, but the 3/8" dowel plugs were not big enough or long enough for the holes in the 2x4's, so I finished the project w/o plugging the holes, it's a farmhouse design so not that big of a deal. But what can I do for future projects? I am confused. Thank You

Views: 428

Reply to This

Replies to This Discussion

Dan, 

Unfortunately the plugs are designed to be used with material that is 3/4" - 1 1/4". If working with 1 1/2" material you can purchase some 3/8" dowels and create your own plugs. This would allow you to set them to the correct depth needed for your material.  

OR ... the Kreg Custom Pocket-Hole Plug Cutter with the "to-be-purchased separately" Custom Plug Cutting Bit - HD bit can make plugs for the HD pocket holes.

Thanks for the reply.....3/8" dowel rod is too small of diameter for my holes.....that's what I bought to find out they don't work.....



Ken Kortch said:

OR ... the Kreg Custom Pocket-Hole Plug Cutter with the "to-be-purchased separately" Custom Plug Cutting Bit - HD bit can make plugs for the HD pocket holes.

Dan-- I've found not all dowels are the same diameter in the bin. I drill a scrap & take it with me to make test fits. Not an every time answer to your problem but it works more often than not. Also I've never mic'ed a step drill bit to see the true diameter.

Reply to Discussion

RSS

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

Missing clamping table project 2 Replies

Started by Brandon B. in Beginners' Zone. Last reply by Brandon B. 22 hours ago.

90 gallon aquarium stand

Started by Glenn Gilbert in Community-Specific Jun 11.

Proper clamping technique 1 Reply

Started by Ron Salgado in Kreg Jig® Operation. Last reply by KregRep May 31.

Edge joining 3/4 inch plywood 2 Replies

Started by Lynn Greff in Beginners' Zone. Last reply by Lynn Greff May 20.

Where can I get a K3 owners manual.... 3 Replies

Started by John Chasse in Beginners' Zone. Last reply by John Chasse May 19.

Product Reviews

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

© 2018   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_