Kreg Owners' Community

We're happy to announce that the much-desired Kreg Screw Selector Wheel is now available! Many of you may remember the previous laminated paperboard version that we released as part of our Toolboxx™ Master Collection. In response to great customer interest, we have created an all-new, highly durable polypropylene version.

The handy Screw Selector Wheel makes it easier than ever to build projects with Kreg Joinery™. Just dial in the thickness of each piece to be joined—whether those thicknesses are the same or different—and the Wheel shows you the correct screw length and Kreg Jig® setting.

Key Features include:

  • Two sided: shows face joints and edge joints
  • Works with 1/2", 5/8”, 3/4", 7/8”, 1”, 1-1/8”, 1-1/4", 1-3/8”, 1-1/2" material
  • Compatible with Kreg Jig® K3, K4, K4MS, K5, and R3
  • Durable .5mm polypropylene construction
  • Permanent direct printing with a glare-free matte finish
  • Tab with hole makes the Wheel easy to hang

The Screw Selector Wheel sells for $9.99 and is available at kregtool.com. You can purchase yours here. Screw Selector Wheels are also shipping out to our great Kreg Dealers now. So, if they’re not on the shelf at your favorite store already, they will be soon.

Views: 5363

Reply to This

Replies to This Discussion

Thanks for getting the wheel out to the members , when will it be in the stores or on Amazon ????

The Screw Selector Wheel has been shipping out, so it will be arriving at retailers right away. I don't have exact dates currently. It depends on when they placed their orders.

KregRep

KR,

Thanks for making this handy tool available. 

Many will be pleased with its usefulness.

Sounds great.

Any idea when they will be available in the UK ?

Glen.

Glen, we don't know any exact dates yet. It depends on when UK dealers place their orders.

Kreg Rep

Fair enough, but who is the best UK dealer to buy my Kreg supplies from ?

KregRep said:

Glen, we don't know any exact dates yet. It depends on when UK dealers place their orders.

Kreg Rep

Glen,

Here is the contact information for Toolstream, which is located in the UK:
Boundary Way, Lufton Trading Estate
Yeovil, Somerset, BA22 8HZ
United Kingdom
Phone: 01935 470790
Fax: 01935 47079

Or, to find a stockist, enter your postal code here:
http://www.kregtool.eu/shop-local-serve.html

Just out of interest glen this was where my triton router was repaired when it went pete tong/wrong.

KregRep said:

Glen,

Here is the contact information for Toolstream, which is located in the UK:
Boundary Way, Lufton Trading Estate
Yeovil, Somerset, BA22 8HZ
United Kingdom
Phone: 01935 470790
Fax: 01935 47079

Or, to find a stockist, enter your postal code here:
http://www.kregtool.eu/shop-local-serve.html

I've been waiting for this. Thanks!

You are very welcome! Thank you for your interest in Kreg products.

James P. Cottingham said:

I've been waiting for this. Thanks!

This info should be free and included with the purchase of any pocket-hole jig. Why should a costumer have to pay the manufacturer to identify how best to use the tool?  

Roger,

How to use the tool is described in the manual.

There's cost involved in producing the wheel.

Perhaps the wheel could be included in a master kit, and then charge a additional $10 to cover the product cost.



Roger G Klein said:

>>> This info should be free.../p>

>>>...how best to use the tool.../span>

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_