Kreg Owners' Community

Has anyone else bought and used the new plug cutter , it works ok in straight grain , not as well in cross grain , using yellow pine , have all three  bit,s   and hope to make some plug,s , but some come out not so good , !! Tried hi speed and low speed , what may I be doing worng , ???? JIM !!

Views: 1079

Reply to This

Replies to This Discussion

The plugs that I cut with the jig fit good on 1 1/2 stock . They don't fit in 3/4 stock to tight even with 15 degree cut.  Any help James?

Gary there are 3 different size plug cutters; Micro, standard & HD (Heavy Duty).  Are you using the HD plug cutting bit by any chance?

I have all 3 plug cutters and used the standard bit and found that the plugs fit perfectly in the 3/4" stock.

Just a thought.

Think Tony may be headed in the right direction with his thought !!



Gary roofner said:

The plugs that I cut with the jig fit good on 1 1/2 stock . They don't fit in 3/4 stock to tight even with 15 degree cut.  Any help James?

I only have the standard bit certainly not the size of the Hd hole not the problem. The holes cut  by the kreg jig are fuzzy I'll sand the holes. I am starting a new project .  I'll make sure the holes are cleaner.

They did fit in the new cut parts but they fit is so tight that you damage the plug removing them.

Hi Gary,

I apologize if you already know this.  I don't believe that the plugs are really designed to come out once you plug a pocket hole,  Actually you want a bit of a snug fit.  When I use plugs, and this goes for the plugs that I've purchased from Kreg before I got the plug cutters, I'll put a little wood glue in the pocket hole, slide the plug in leaving about a 1/32" to a 1/16" sticking up.  This helps in filling any gap that may occur by pushing the plug in all the way, and you get to sand the top of the plug so that it's nice and flush with your project material.

Here's a quick video from Youtube on plugging pocket holes,

https://youtu.be/y32NHxN4vDw

I found out the problem cutting  the plus. It was because the support was about 1/16 above the deck of the kreg jig . This translates into cutting a shorter plug. I have an older k4 that I have dedicated to plug cutting. I am building a new project that is actually using the plugs they worked great. I cut mine loss with my tablesaw did not tape. I just measured length and subtracted the 3/16 set the blade height  to even with top stock with a 15 degree tilt to the blade . I will take some picture tomorrow .

Can you cut plugs out of 2 inch stock which as actually 1.5 inch standard? I have Douglass fir which is  sold in 2 inch stock need plugs. Plugs are huge!!!!

Reply to Discussion

RSS

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

Kreg cabinet hardware jig

Started by Robert Melrose in Other Kreg® Products on Monday.

designing your projects on-line 4 Replies

Started by Robert Wolf in Beginners' Zone. Last reply by KregRep 15 hours ago.

Plugs For 2x4's 4 Replies

Started by Dan Smith in Beginners' Zone. Last reply by Glen S Apr 9.

Bench dog holes 3 Replies

Started by Bruno in General Woodworking. Last reply by Brad Martin Mar 24.

Bench dog holes 4 Replies

Started by Bruno in General Woodworking. Last reply by Glen S Mar 26.

Product Reviews

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 1 Comment

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

© 2018   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_