Hello-
I picked up a Kreg Master System over the holidays and I am gearing up to create my first project.
Project is going to be a walk in closet organizational unit.
Question I have is what would be the best way to attach my plywood partitions to the wall? I am thinking of using a 1x4 stringer attached to the wall studs.
Option 1 would be to us Kreg joints on my partition into the stringer.
Option 2 would be to attach the partition with a butt joint (screw from back side of stringer into partition) prior to mounting the whole assembly tot he wall.
I am concerned about tear out from the weight of the clothes hanging on the rod attached tot he partitions.
Cheers
K
Tags:
Permalink Reply by Lee on January 8, 2013 at 5:24pm Here is a link to roughly what I am referring to, made by another member. I think they mounted it so it does not touch the floor, which is what I want to do.
http://kregjig.ning.com/photo/backside-of-closet-organizer
Cheers
K
Permalink Reply by John Schaben on January 8, 2013 at 6:05pm If you want to hang it off the floor, a French cleat should do the job just fine. Put screws in the wall portion of the cleat at every stud.
Permalink Reply by Ken Darga on January 8, 2013 at 8:56pm Lee,
The unit shown in the photo, weighs a lot.
It needs to be substantially supported.
I'd recommend resting it on the floor or install suitable supporting members,
to support the shelving unit and it's contents.
Also, the unit needs to be suitably anchored to the wall,
so as to prevent it from inadvertently tipping over.
The weight of that unit, tipping or falling over, will cause serious bodily injury.
It's better to try to keep a bad thing from happening than it is to fix the bad thing once it has happened.
Permalink Reply by Lee on January 9, 2013 at 1:48pm I appreciate the replies, I had not thought about a french cleat!
To take Ken's suggestion in, I could build smaller modular units and install them? Sort of like a cabinet minus the door and bottom (I am doing double hanging) and install that way. Little more labor and material but meets my need of not having the unit touch the floor.
Thoughts?
Cheers
K
Chief's Shop Plans
Download Kreg Project Plans Adirondack Chair
Garden Bench
Simple Workbench
Storage Chest
Poker Table
Demilune Table
Modern Angle Chair
Stackable Toy Bin
Baseball Storage Center
Custom Wood Bathtub
Hide-A-Way Ironing Board
Deck Box
Turned Leg Media Console
Wall Cabinet
"Book Castle" Shelf
Connect
Get the Kreg Plus Newsletter
Kreg on Facebook
Kreg on YouTube
Kreg on Twitter
Customer Service
Other Great Links
General Woodworking Tips
Ultimate Glue Guide
Kreg Trim Carpentry Videos
Kreg Product Videos
Third-Party Kreg Jig Reviews
Post your own Kreg Jig Review
Easy-to-Use Drafting Software
The Kreg Jig on "Rachael Ray"
The Kreg Jig on "Cool Tools"
© 2013 Created by KregRep.