New here... - Kreg Owners' Community2024-03-28T20:04:24Zhttps://kregjig.ning.com/forum/topics/new-here-2?commentId=2900167%3AComment%3A932410&feed=yes&xn_auth=noTechnical Support will be hap…tag:kregjig.ning.com,2017-12-18:2900167:Comment:9325752017-12-18T21:09:15.935ZKregRephttps://kregjig.ning.com/profile/KregRep
<p>Technical Support will be happy to help with this. You may reach them at technicalsupport@kregtool.com or toll-free 800-447-8638. Thanks!</p>
<p>Technical Support will be happy to help with this. You may reach them at technicalsupport@kregtool.com or toll-free 800-447-8638. Thanks!</p> Are you sure there aren't poc…tag:kregjig.ning.com,2017-12-18:2900167:Comment:9325702017-12-18T11:31:53.812Zjustin waldronhttps://kregjig.ning.com/profile/justinwaldron
<p>Are you sure there aren't pocket holes holding that piece of faceframe in that you could just unscrew and run it through the table saw? Your guide will certainly work if there aren't. <br></br> <br></br> <cite>Ken Darga said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/new-here-2?commentId=2900167%3AComment%3A932421&xg_source=msg_com_forum#2900167Comment932493"><div><div class="xg_user_generated"><p>CLear packaging tape can suffice---cover the areas that the saw will ride…</p>
</div>
</div>
</blockquote>
<p>Are you sure there aren't pocket holes holding that piece of faceframe in that you could just unscrew and run it through the table saw? Your guide will certainly work if there aren't. <br/> <br/> <cite>Ken Darga said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/new-here-2?commentId=2900167%3AComment%3A932421&xg_source=msg_com_forum#2900167Comment932493"><div><div class="xg_user_generated"><p>CLear packaging tape can suffice---cover the areas that the saw will ride on.</p>
<p>When complete, just lift and peel off the tape. </p>
<p> </p>
<p><br/> <br/> <cite>Jack Julius said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/new-here-2#2900167Comment932421"><div><div class="xg_user_generated"><p>I decided I was going to make a fence, so I wouldn’t scratch the face frame.... hopefully this will work. </p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/1935482377?profile=original" target="_self"><img width="721" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/1935482377?profile=RESIZE_1024x1024"/></a></p>
</div>
</div>
</blockquote>
</div>
</div>
</blockquote> CLear packaging tape can suff…tag:kregjig.ning.com,2017-12-18:2900167:Comment:9324932017-12-18T04:53:32.728ZKen Dargahttps://kregjig.ning.com/profile/KenDarga
<p>CLear packaging tape can suffice---cover the areas that the saw will ride on.</p>
<p>When complete, just lift and peel off the tape. </p>
<p> </p>
<p><br></br> <br></br> <cite>Jack Julius said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/new-here-2#2900167Comment932421"><div><div class="xg_user_generated"><p>I decided I was going to make a fence, so I wouldn’t scratch the face frame.... hopefully this will work. …</p>
<p></p>
</div>
</div>
</blockquote>
<p>CLear packaging tape can suffice---cover the areas that the saw will ride on.</p>
<p>When complete, just lift and peel off the tape. </p>
<p> </p>
<p><br/> <br/> <cite>Jack Julius said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/new-here-2#2900167Comment932421"><div><div class="xg_user_generated"><p>I decided I was going to make a fence, so I wouldn’t scratch the face frame.... hopefully this will work. </p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/1935482377?profile=original" target="_self"><img width="721" src="http://storage.ning.com/topology/rest/1.0/file/get/1935482377?profile=RESIZE_1024x1024" width="721" class="align-full"/></a></p>
</div>
</div>
</blockquote> I decided I was going to mak…tag:kregjig.ning.com,2017-12-18:2900167:Comment:9324212017-12-18T03:22:00.575ZJack Juliushttps://kregjig.ning.com/profile/JackJulius
<p>I decided I was going to make a fence, so I wouldn’t scratch the face frame.... hopefully this will work. </p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/1935482377?profile=original" target="_self"><img width="721" src="http://storage.ning.com/topology/rest/1.0/file/get/1935482377?profile=RESIZE_1024x1024" width="721" class="align-full"/></a></p>
<p>I decided I was going to make a fence, so I wouldn’t scratch the face frame.... hopefully this will work. </p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/1935482377?profile=original" target="_self"><img width="721" src="http://storage.ning.com/topology/rest/1.0/file/get/1935482377?profile=RESIZE_1024x1024" width="721" class="align-full"/></a></p> Here is the oven cabinet...…tag:kregjig.ning.com,2017-12-17:2900167:Comment:9322582017-12-17T18:25:24.081ZJack Juliushttps://kregjig.ning.com/profile/JackJulius
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/1935482586?profile=original" target="_self"><br></br><img class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/1935482586?profile=RESIZE_1024x1024" width="721"></img></a> <a href="http://storage.ning.com/topology/rest/1.0/file/get/1935482586?profile=original" target="_self"></a></p>
<p>Here is the oven cabinet... These were spaces for slide out drawers. I’m adding two separate ovens, and the warming drawer at the bottom. The first oven already has a base and I have to create new base for the metal and raise the base for the bottom. I…</p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/1935482586?profile=original" target="_self"><br/><img width="721" src="http://storage.ning.com/topology/rest/1.0/file/get/1935482586?profile=RESIZE_1024x1024" width="721" class="align-full"/></a><a href="http://storage.ning.com/topology/rest/1.0/file/get/1935482586?profile=original" target="_self"></a></p>
<p>Here is the oven cabinet... These were spaces for slide out drawers. I’m adding two separate ovens, and the warming drawer at the bottom. The first oven already has a base and I have to create new base for the metal and raise the base for the bottom. I cut one of the panels off already using a handsaw, which greatly reduced the sawdust. A friend of the oven will cover these cuts. The mark on the panel below is where I need to cut about an inch or so into the panel. I was thinking of using a handsaw but wasn’t sure if I could keep a straight line. Even using something as a guide. And it would take a long time to cut. I could cut a little on the inside of a line with a jigsaw all the way around and then sanded down. Jigsaw might be a little faster and a little less dust then using regular handsaw. </p>
<p> Thank you and I really really really appreciate your help and comments </p> Look into the mini angle circ…tag:kregjig.ning.com,2017-12-17:2900167:Comment:9324102017-12-17T13:59:36.232ZKen Dargahttps://kregjig.ning.com/profile/KenDarga
<p>Look into the mini angle circular saws, that uses 3-1/2 to 4" blades.</p>
<p>Also a good jig saw, may suit your needs. </p>
<p>You won't be able to make the cut up tagent to an inside corner, with either; however, you could finish the cut using a fine tooth hand saw.</p>
<p></p>
<p>If the cut edge can't be made "smooth" with a saw, make the rouge cut and leave 1/16" to finish the edge with a palm router and flush cutting bit---use a straight edge to guide the router…</p>
<p>Look into the mini angle circular saws, that uses 3-1/2 to 4" blades.</p>
<p>Also a good jig saw, may suit your needs. </p>
<p>You won't be able to make the cut up tagent to an inside corner, with either; however, you could finish the cut using a fine tooth hand saw.</p>
<p></p>
<p>If the cut edge can't be made "smooth" with a saw, make the rouge cut and leave 1/16" to finish the edge with a palm router and flush cutting bit---use a straight edge to guide the router base.</p>
<p></p>
<p>I've used the methods described above, and made it work.</p>
<p>I also keep an oscillating sander, at the ready, to tough up an exposed edge.</p>
<p></p>
<p>You may need to do some "fine" tuning to the cut edge to make it smooth and true, to make a closed bust joint. A card scraper is another useful tool. </p>
<p></p>
<p>When sawdust is a problem being expelled into an area, I cover the surrounding objects with drop cloths.</p>
<p>And, use a vac with a scoop/flared shape nozzle, held near the cutting/sanding tool, and suck up the dust. Keeps the dust down.</p>
<p></p>
<p></p> Assuming you just need to tri…tag:kregjig.ning.com,2017-12-17:2900167:Comment:9324052017-12-17T10:41:23.774Zjustin waldronhttps://kregjig.ning.com/profile/justinwaldron
<p>Assuming you just need to trim a faceframe, you may be able to completely remove the frame and make the cuts on the table saw, you could cut that portion of faceframe out and add a new piece or my final suggestion would be to use a track saw/jig saw to make your cuts in place. Most wall ovens have a beauty ring that should cover up a minor errant cut. Hope this helps.</p>
<p>Assuming you just need to trim a faceframe, you may be able to completely remove the frame and make the cuts on the table saw, you could cut that portion of faceframe out and add a new piece or my final suggestion would be to use a track saw/jig saw to make your cuts in place. Most wall ovens have a beauty ring that should cover up a minor errant cut. Hope this helps.</p>