Kreg Owners' Community

Any recommendations on how to attach a K4 or K5 Jig to a Mobile Project Center? What hardware should be used?

Views: 1710

Reply to This

Replies to This Discussion

Glenn, 

The Mobile Project Center has mounting holes in the top allowing you to fasten your jig securely. All you will need are some 10-32 machines screws and nuts to hold it in place. There are nut retainers on the bottom of the table that will enable you to easily tighten your jig in place. If you have any other questions, please let us know.  

Thank you!

Here is how I mount my k3.

Attachments:

seems like it should have been designed to be fastened with at least the kreg clamps. I store my K5 in the storage case.

Why in the world didn't y'all include this information in the manual? Seems odd to me. 

Thanks for the info.

KregCS said:

Glenn, 

The Mobile Project Center has mounting holes in the top allowing you to fasten your jig securely. All you will need are some 10-32 machines screws and nuts to hold it in place. There are nut retainers on the bottom of the table that will enable you to easily tighten your jig in place. If you have any other questions, please let us know.  



Aaron Schrank said:

Why in the world didn't y'all include this information in the manual? Seems odd to me. 

Thanks for the info.

+1

There is no right or wrong way to install.

Reply to Discussion

RSS

Need Help?

Technical Support is happy to help via phone or email. Call toll-free 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Product Reviews

Kreg Mobile Project Center

Posted by John Tomkinson on May 5, 2017 at 5:34am — 2 Comments

Handy jig to hold and push plugs in!

Posted by Dave Stanton on March 31, 2017 at 5:53pm — 1 Comment

Laguna 14BX Band Saw

Posted by Tim Grace on December 20, 2016 at 1:52am — 1 Comment

© 2017   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_