Some time back, a poster mentioned that they had received a metric version of the SSW wheel. I have been waiting for it to come onto Amazon (or to be stocked by Carbatec the Australian dealer) to no avail. Has anyone seen it or was it a one off? I did adjust mine to include metric values for the wood.
If you contact Technical Support at 800-447-8638 or email@example.com, they'll be happy to help you obtain a metric version.
Thanks. I will do that. Alex
i was going to get one of these but it was over 3 times the price of what they are in the States. On the boxes that the pocket screws come in, they tell you the thickness of the timber they're intended for, so don't waste your hard earned on a chart.
I have added metric labels (see photo) to the wheel, which I find a handy reference - although, as you say, the information is available elsewhere as well.
Kreg customer service have responded to my call but unfortunately they don't have a metric version so I will continue to use my own version.
I have now spoken to Kreg customer service and they advised that they don't have a metric version. Thanks for the responses. Alex
What are your common dimensions mine are 3/4 and 1 1/2.. Case 1 .75 inches or 19 mm .748. Case 2 1.5 inches 38 mm = 1.496. To make those conversions covert to 1.9 centimeters divide by 2.54. Same 3 .8 cm divided by 2.54.
Thanks Gary. I did the conversions and used a label maker to add them to my existing wheel (see photo above) but was hoping for a neater version. Alex
Looks pretty neat to me !
Alex I didn't realize that wasn't an official kreg product well done.