Kreg Owners' Community

Is it easier to just buy the Layout table already set up or to make my own utilizing KREG's Track systems

Views: 187

Reply to This

Replies to This Discussion

Easier to buy but where is the challenge in that?

When you buy, you have to adapt to what it is.

When you build, you make it what you want/need.

Most of us are here on this site because we want to build.

Thanks Brad I appreciate your comment! I will take the challenge and Build this my self, that way I can tweek it to what I feel I need For a layout, assembly bench, Thanks again to You and another member who suggested I take the Challenge of Building What do you suggest for the track system, the 

kreg/Rockler tracks or are there some other brands that suffice? Thanks your suggestions will be greatly appreciated and taken into consideration.

Yours in Shop Dust,

Todd J



Brad Martin said:

Easier to buy but where is the challenge in that?

Thanks R.E. Woods I appreciate your comment! I will take the challenge and Build this my self, that way I can tweek it to what I feel I need For a layout, assembly bench, Thanks again to You and another member who suggested I take the Challenge of Building What do you suggest for the track system, the 

kreg/Rockler tracks or are there some other brands that suffice? Thanks your suggestions will be greatly appreciated and taken into consideration.

Yours in Shop Dust,

Todd J


R. E. Woods said:

When you buy, you have to adapt to what it is.

When you build, you make it what you want/need.

Most of us are here on this site because we want to build.

I used the Kreg Clamp Track and clamp blocks with Rockler T-track to use their inline clamps so I can use it to make boxes.

2nd bench will be drilled with 3/4 holes at 96mm centres with a downdraft box. I have a panel clamp system that will work with the dog holes and drilled bars. I have Kreg inline clamps and dogs that will allow the Automax clamps to screw into the dog tops rather than use the Kreg adaptor.

Hi Todd, 

Thanks for your interest! Both options offer unique benefits. With the Mobile Project Center, no assembly is required, and the tables provide a large 27¾" x 31½" (70x80cm) work surface with 360° access. Learn more on the product page

Clamping accessories allow you to customize a custom-built workbench. If you are looking for workbench related project plans, our website buildsomething.com is a good place to start. 

Happy Building!
KregRep


This is my work surface. It is 2 layers of 3/4 MDF on top of an old kitchen base cabinet. The height also allows me to use it as a tablesaw outfeed. It has heavy duty lockable swivel caster on the bottom.

The work surface is roughly 2 ft. by 4 ft.

Looking good. You might want some clamp blocks too.

Reply to Discussion

RSS

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

Edge joining 3/4 inch plywood 2 Replies

Started by Lynn Greff in Beginners' Zone. Last reply by Lynn Greff on Monday.

Where can I get a K3 owners manual.... 3 Replies

Started by John Chasse in Beginners' Zone. Last reply by John Chasse on Saturday.

HELP! Older Kreg Precision Router Fence, need parts! 1 Reply

Started by Dan Spaulding in Beginners' Zone. Last reply by Dan Spaulding May 17.

kreg production stop extension 1 Reply

Started by Pat Meeuwissen in Beginners' Zone. Last reply by Brad Martin on Tuesday.

Layout/Project Setup Table 11 Replies

Started by Todd J Michalec12@gmail.com in Beginners' Zone. Last reply by Brad Martin on Tuesday.

Product Reviews

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

© 2018   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_