Kreg Owners' Community

Is it easier to just buy the Layout table already set up or to make my own utilizing KREG's Track systems

Views: 1418

Reply to This

Replies to This Discussion

Easier to buy but where is the challenge in that?

When you buy, you have to adapt to what it is.

When you build, you make it what you want/need.

Most of us are here on this site because we want to build.

Thanks Brad I appreciate your comment! I will take the challenge and Build this my self, that way I can tweek it to what I feel I need For a layout, assembly bench, Thanks again to You and another member who suggested I take the Challenge of Building What do you suggest for the track system, the 

kreg/Rockler tracks or are there some other brands that suffice? Thanks your suggestions will be greatly appreciated and taken into consideration.

Yours in Shop Dust,

Todd J



Brad Martin said:

Easier to buy but where is the challenge in that?

Thanks R.E. Woods I appreciate your comment! I will take the challenge and Build this my self, that way I can tweek it to what I feel I need For a layout, assembly bench, Thanks again to You and another member who suggested I take the Challenge of Building What do you suggest for the track system, the 

kreg/Rockler tracks or are there some other brands that suffice? Thanks your suggestions will be greatly appreciated and taken into consideration.

Yours in Shop Dust,

Todd J


R. E. Woods said:

When you buy, you have to adapt to what it is.

When you build, you make it what you want/need.

Most of us are here on this site because we want to build.

I used the Kreg Clamp Track and clamp blocks with Rockler T-track to use their inline clamps so I can use it to make boxes.

2nd bench will be drilled with 3/4 holes at 96mm centres with a downdraft box. I have a panel clamp system that will work with the dog holes and drilled bars. I have Kreg inline clamps and dogs that will allow the Automax clamps to screw into the dog tops rather than use the Kreg adaptor.

Hi Todd, 

Thanks for your interest! Both options offer unique benefits. With the Mobile Project Center, no assembly is required, and the tables provide a large 27¾" x 31½" (70x80cm) work surface with 360° access. Learn more on the product page

Clamping accessories allow you to customize a custom-built workbench. If you are looking for workbench related project plans, our website buildsomething.com is a good place to start. 

Happy Building!
KregRep


This is my work surface. It is 2 layers of 3/4 MDF on top of an old kitchen base cabinet. The height also allows me to use it as a tablesaw outfeed. It has heavy duty lockable swivel caster on the bottom.

The work surface is roughly 2 ft. by 4 ft.

Looking good. You might want some clamp blocks too.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Kreg Accu-Cut and Rip-Cut 4 Replies

First off tried to mention all this to Kreg via Email and just because I live outside the USA seems that the system does not work as they say phone number invalid, which is not.OK bought a Accu-Cut and set it up no problems there worked OK both…Continue

Started by Kenneth J Hunt in Other Kreg® Products. Last reply by Kenneth J Hunt on Wednesday.

Router bits 4 Replies

Tungsten carbide? Skill level is beginning woodworker

Started by MINICOOPERUSAF in Beginners' Zone. Last reply by Tim Grace on Monday.

R3 part

hi all can anybody help got r3 for Xmas and I have noticed that the gray tabs are different think somebody  in assembly was talking the piss day and I have 1 metric side and imperial side so they don’t match up hellllp plzericContinue

Started by Eric Kershaw in Beginners' Zone Jan 8.

Having issues with K5 5 Replies

I watched the setup videos, searched for information and spent half a day and can not get the clamp to hold.i tightened up the screws underneath in various stages up to fully tightened, makes no difference.I do not get the two clicks and I can slide…Continue

Started by Todd Caldwell in Beginners' Zone. Last reply by Glen S Jan 7.

Product Reviews

Merry Christmas r3

 Hi all Santa left me one under the tree the elf thar made it must have had a bad morning because one gray tab is metric and the other one is imperial help Santa what do I do

thanks Eric 

Posted by Eric Kershaw on January 8, 2019 at 6:27pm

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.

The…

Continue

Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_