Kreg Owners' Community

Has anyone built their own storage station for their Kreg jigs? If so, would you care to share the plans?

Views: 444

Reply to This

Replies to This Discussion

I brought mine (along with bits and a box of screws to Cabellas and found a perfect tackle box that just fits the jig(s), screws, plugs and drills and drivers perfectly. Local sports shops should have something similar? I frequently need to use mine outside the shop and this works great for me.
Randy

The bad thing about Kreg stuff is they keep coming out with more and more must-have tools.  When i built my storage/jig mount (link below) it was sufficient. Now I have a separate drawer with more clamps and I also built a clamping table that doubles as an outfeed table. I just might build a box under the jig mount with some more drawers. I hadn't thought about it but your query made me think about rebuilding or modifying my existing

setup.

http://kregjig.ning.com/photo/albums/jig-mount-with-storage

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_