Kreg Owners' Community

I am new to this site and I have received two newsletters to my email and they have proved usefull.  However, I have searched this site for "back issues" of the news letter and cannot find any reference to them.  Are they available? If so, where are they?

 

Thanks Abe

 

 

Views: 200

Reply to This

Replies to This Discussion

Abe, great question! If you look at the bottom of any of the newer newsletters, you will see a link that says "Past Tips from Kreg" this is the archive of Newsletters... or you can click here: http://www.facebook.com/notes.php?id=54208550837
I am very sorry, I used the link from the rmail I received from this and it said "out appoligies, page not found". tried again to get back to my message and network errrors occured.

Any way, thank you for your reply, However, I went back to the newsletter and found your link outside the margin on the bottom right. It's a little hard to easily decern that "more tips" means ramaining newsletters. Oh well, I did find them and they were usefull.

Thanks Again

Abe

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_