Tags:
Jason , very nice , great Idea, well done, Jim !!
Nice design with plenty of storage space. I designed mine with a couple of drawers so I don't have to move things off the top to get clamps, drill bits, or screws.
Thanks James!
james wilhelm said:
Jason , very nice , great Idea, well done, Jim !!
Very cool! Nice job on yours as well!
R. E. Woods said:
Nice design with plenty of storage space. I designed mine with a couple of drawers so I don't have to move things off the top to get clamps, drill bits, or screws.
Nice job Jason on the work station if I can call it that .Have you thought of adding a 2"x2" to the left and right side so you can clamp it down ,and still access the drawers ?
awesome may I steal your idea
Hello Michael, The lid actually opens up around the Jig.
michael evans said:
Nice job Jason on the work station if I can call it that .Have you thought of adding a 2"x2" to the left and right side so you can clamp it down ,and still access the drawers ?
Hey Bill,
Thats why I posted it. Love sharing different ideas. I built this just with scrap wood I had. Also kept it a certain height so it can still roll under my big work bench. Love to see what you come up with :)
bill crowder said:
awesome may I steal your idea
Looks good! Very functional and well thought out. Keep up the good work!
KregRep
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service