I'm building a cornhole board and I am a complete newbie in woodworking. I've got my 2x4's attached in a rectangular frame for my cornhole board and am getting ready to attach the top to it. The top is 1/2" plywood, which calls for a 3/4" screw. I went to buy the screws on Amazon, and it says "3/4-Inch screw length designed exclusively for Micro Pocket system". Am I buying the correct thing here? What does the screw length have to do with the type of Kreg jig?
Tags:
Hi Kathy,
You are correct to use a 3/4" screw to attach 1/2" plywood. You were probably looking at a micro 3/4" Kreg screw. Instead, search for regular 3/4" Kreg screws: http://www.amazon.com/Kreg-Pocket-Hole-Screws-Panhead-Fine/dp/B0032...
KregRep
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service