Kreg Owners' Community

I just got my K5, and it's really nice. However, I cannot find a nozzle to fit the vavuum port, and I can't locate an adapter to make it fit what is available. Woodcraft store just shrugged. Any solution to this?

Thanks,
Barbara Dyer

Views: 459

Reply to This

Replies to This Discussion

Theold extension tubes I had laying around from an old Shop Vac brand shop vac fits mine just right. I use a small shop vac and not the dust collector.

I found an adapter at Rockler.

Try Home Depot. Rigid makes some adapters. Search for "rigid vac adapters"

http://www.homedepot.com/s/rigid%2520vac%2520adapters?NCNI-5

PS---make accurate measurements of the port on your device---

take it with you to check the adaptors, to insure they'll fit.

I've seen some adaptors marker 1-1/2" and they measured 1-1/4" and

 visa versa.

Some of the workers at some of the stores tell you they're the same---

some don't know there's a different.

Akin to a 2x4, that measures 1-1/2 x 3-1/2".

BTW---if you have/find an adapter, that may be a little loose, 

you can simply make a fix by adding a wrap or two of masking tape, (blue or green), around the male end, to make a tigher fight.

You want to the fit to be "snug"---just so it doesn't vibrate loose, or easily come off.

Use a slight twisting motion to tighten/loosen.

 

This kit includes a 1" and 1-1/2" port adaptor.

The port on the Kreg is 1-1/4".

I use this adapter, on my shop vac to the Kreg ports.

http://www.rockler.com/shop-vac-dust-fitting-adapter-for-1-1-4-to-2...

I've also found adapters at vac supply stores.

Take your vac hose with you, when shopping, so as to get the correct match fit.


Robert Melrose said:

OK. Finally got a pic of my setup. I hope this helps.

That small shop vac is WAY more vac than you really need for the K5 port. I can feel the pull when I set the piece in place to be drilled.

[URL=http://s228.photobucket.com/user/BrightwoodTurnings/media/20170323_160629_zps5xb1metm.jpg.html][IMG]http://i228.photobucket.com/albums/ee217/BrightwoodTurnings/2017032...[/IMG][/URL]

Luckily I had recently purchased the Ridgid car cleaning kit and that hose fits.

The Rigid car cleaning kit uses a 1-1/4" hose, so I assume any 1-1/4" connectors would work (for those who don't have a nearby Home Depot.

Reply to Discussion

RSS

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

LED Lighting on mobile bench

Hi AllJust got myself a new Metabo mitre saw, kitted it out with a new Freud Pro blade as well as "pimped up" my bench with LED lighting so I can find stuff! I have 22 LED daylight tubes in my fittings in the garage so there is more than enough…Continue

Tags: blade, mitre, saw, lighting

Started by Steven Baynes in Miscellaneous Oct 8.

Ridgid tools 1 Reply

I originally bought Ridgid tools for the warranty, well I had to replace batteries. Very easy and got new batteries and chargers. Found out they don't make 24 volt tools any more, so I sent in a hammer drill, impact driver and light for replacement…Continue

Started by steve kidd in Beginners' Zone. Last reply by Glen S Oct 9.

Cabinets and the best wood choice for the carcass. 3 Replies

I am going to try and new project.  Never made cabinets before.  Researched and You-tubed like crazy.  So many opinions.  Mine are going to be:1 each= 30"W x 14"D x 38"H2 each =29"W x 14"D x 38"H1 floor to ceiling cabinet 18"W x 24"D and the height…Continue

Started by Stephanie H in Kreg Jig® Projects. Last reply by Glen S Oct 2.

1x6 into a 4x4? 4 Replies

Perhaps this question has already been asked somewhere on this forum but I wasnt able to find it after an hour or so of searching. Is there a recommended length of Kreg screw to use when combining a 1x6 into a 4x4 post. I have seen a few conversion…Continue

Tags: size, screw

Started by Dave N in Kreg Jig® Projects. Last reply by Edward Weitsman Sep 29.

Product Reviews

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.

The…

Continue

Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

Kreg K5 Jig Review

Posted by Daris R. on November 20, 2017 at 5:39pm

© 2018   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_