Kreg Owners' Community

I purchase the R3 and after inspecting it, I'm wondering should I up grade to the R4.

I need to build a 2x4 rack for my storage space.

Views: 1225

Reply to This

Replies to This Discussion

Honestly, though I don't own an R3 (I own the K4 Master system) I think you can do a LOT of great stuff with your current R3 jig. After all, the basic settings of the jig are the screw depth (which stops the drill just before it breaks through the end of the material) and the jig height (which places the drill tip  midway across the width of the material).

Of course the other consideration is the screw length which provides the greatest screw penetration without exiting through the other side of the material being attached.

Your R3 jig can certainly do all of that. The only things the K4 jig might do better - that come to mind right away - is to ensure that the material is 90 degrees to the jig - which doesn't seem very important, and to collect dust - which may or may not be so important to you.

Having not used the R3 ... How securely does the slider keep the height setting while in use?

I myself have a r3 and like it but do wish that it came with a clamp 

Hi, Donald.  I bought the R3 a couple of years ago, intending to use it on a large project with a few pocket holes.  After I looked at the R3 and the project plans for a while, I returned the R3 to the store and bought the K4 system and a clamp.  It turned out to be a good move.

Last summer I built a desk using lots of pocket holes, and I was very happy that I didn't try to do it with an R3.  The built-in material holding clamp and the vacuum attachment helped me make quick work of the pocket holes.

However, I should have spent more money and bought the K5.  The front-mounted clamp handle and the adjustable stop are worthwhile features.  But I'm still planning to add a pneumatic clamp to the K4, as suggested by a Kreg user last winter.  It's not a big job to do it, but my current project is occupying all my workshop time this summer.  Maybe when it's finished...

Here's a photo of my jig setup when I drilled all those holes.  Would have taken a long time with the R3.

Attachments:

Donald I beleive the Kreg HD is the tool youneed it is designed for inch and half on up.2x4s 2x6 and holes are said to be larger screws larger

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Kreg Accu-Cut and Rip-Cut 4 Replies

First off tried to mention all this to Kreg via Email and just because I live outside the USA seems that the system does not work as they say phone number invalid, which is not.OK bought a Accu-Cut and set it up no problems there worked OK both…Continue

Started by Kenneth J Hunt in Other Kreg® Products. Last reply by Kenneth J Hunt yesterday.

Router bits 4 Replies

Tungsten carbide? Skill level is beginning woodworker

Started by MINICOOPERUSAF in Beginners' Zone. Last reply by Tim Grace on Monday.

R3 part

hi all can anybody help got r3 for Xmas and I have noticed that the gray tabs are different think somebody  in assembly was talking the piss day and I have 1 metric side and imperial side so they don’t match up hellllp plzericContinue

Started by Eric Kershaw in Beginners' Zone Jan 8.

Having issues with K5 5 Replies

I watched the setup videos, searched for information and spent half a day and can not get the clamp to hold.i tightened up the screws underneath in various stages up to fully tightened, makes no difference.I do not get the two clicks and I can slide…Continue

Started by Todd Caldwell in Beginners' Zone. Last reply by Glen S Jan 7.

Product Reviews

Merry Christmas r3

 Hi all Santa left me one under the tree the elf thar made it must have had a bad morning because one gray tab is metric and the other one is imperial help Santa what do I do

thanks Eric 

Posted by Eric Kershaw on January 8, 2019 at 6:27pm

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.

The…

Continue

Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_