Kreg Owners' Community

Hello, does anyone know where i can get spare drill bits on line for a jack rabbit? I tried the manufacturers site and they say the bits are unavailable. I would appreciate some help because i'm rapidly running out of bits for the best drill and drive set i've ever owned.

Thanks.

Views: 588

Reply to This

Replies to This Discussion

I dunno if they have open stock parts for the thing but Hartville tool is still selling them. May give them a shot

http://www.hartvilletool.com/product/181/jack-rabbit-drill-and-drive

If the mfg says they are unavailable though, they may not be selling them as individual parts.

Are they breaking or only thers work with the jig?

Try Rockler---

they offer something similar, that may suffice.

Our best set for any drilling application! 18-piece Rockler/Insty-Drive self-centering and countersink set lets you convert from drilling and countersinking to installing perfectly centered hinge screws in a matter of seconds — without re-chucking any bits!

Rockler/Insty-Drive 18 Piece Self-Centering & Countersink Set

http://www.rockler.com/product.cfm?page=10605&site=ROCKLER



Gary roofner said:

Are they breaking or only thers work with the jig?

They are excellent drill bits but due to wear and tear they sometimes snap especially when drilling at an angle. It's not that i'm rough with them or any of my hand or power tools it's just that breakages are part and parcel of serious woodworking. I've owned and used a lot of  drill and drive sets and the jack rabbit is the best by far. The only problem is replacing the drill bits.


I tried hartville tool and they have replacement parts but they don't stock one of the bits i need, it's the #8 or 1/8'' drill bit and they only ship to the U.S.A, Canada and Mexico. Thanks anyway,
John Schaben said:

I dunno if they have open stock parts for the thing but Hartville tool is still selling them. May give them a shot

http://www.hartvilletool.com/product/181/jack-rabbit-drill-and-drive

If the mfg says they are unavailable though, they may not be selling them as individual parts.

Hmm, no member profile on this forum. Helpful to include at least a general location so we can filter our suggestions. Most other forums I'm on have a member profile so at least the country can be shared. Some also provide a place to list things like tools available. Really helps with queries like this.

thetoolnut said:


I tried hartville tool and they have replacement parts but they don't stock one of the bits i need, it's the #8 or 1/8'' drill bit and they only ship to the U.S.A, Canada and Mexico. Thanks anyway,
John Schaben said:

I dunno if they have open stock parts for the thing but Hartville tool is still selling them. May give them a shot

http://www.hartvilletool.com/product/181/jack-rabbit-drill-and-drive

If the mfg says they are unavailable though, they may not be selling them as individual parts.

I live in Ireland, some American sites like Toolking and Ace international will ship to Europe. Failing that what i've done in the past is to use a friends U.S.A postal address and he then sends the package on to me. Thanks.

John Schaben said:

Hmm, no member profile on this forum. Helpful to include at least a general location so we can filter our suggestions. Most other forums I'm on have a member profile so at least the country can be shared. Some also provide a place to list things like tools available. Really helps with queries like this.

thetoolnut said:


I tried hartville tool and they have replacement parts but they don't stock one of the bits i need, it's the #8 or 1/8'' drill bit and they only ship to the U.S.A, Canada and Mexico. Thanks anyway,
John Schaben said:

I dunno if they have open stock parts for the thing but Hartville tool is still selling them. May give them a shot

http://www.hartvilletool.com/product/181/jack-rabbit-drill-and-drive

If the mfg says they are unavailable though, they may not be selling them as individual parts.

Jack rabbit appear to have ceased trading. Pity, that's two of the best drill and drive sets i've ever had rendered useless.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

I have a problem with a k3 & k4

K3 problem the threaded insert is lose and will not hold setting. The k4 is worn and  hard to use. I was think maybe epoxy the insert in place may fix it. I tried wood glue did hold. Anyone else had the same problem? The k4 I have thought about…Continue

Started by Gary roofner in Beginners' Zone Mar 14.

Anyone using the Kreg Miter Gauge? 3 Replies

I'm thinking about getting the Kreg Miter Gauge instead of building a sled for my table saw. I figure the miter gauge would have more uses and since the stock will ride on the saw table there is no drop off like with some crosscut sleds. And it…Continue

Started by Marshall Harrison in Other Kreg® Products. Last reply by michael evans on Friday.

Pocket holes aren't deep enough 1 Reply

I'm having trouble getting my pocket holes deep enough. I'm using the kreg j4 system and using 3/4" stock 1 1/2" wide. I have set my jig to 3/4" high for the stock and set my drill bit to 3/4" to the tip. I'm pretty new at using this and I thought I…Continue

Started by JUSTIN RICHARDSON in Beginners' Zone. Last reply by Dave Johnson on Saturday.

Adaptive Cutting System 10 Replies

I really like the Adaptive Cutting System (ACS) and hope to buy it soon. My table saw really scares me as I have a bad knee that likes to buckle on me at inopportune times. I can just picture it happening at the table saw and tossing me into the saw…Continue

Started by Marshall Harrison in Beginners' Zone. Last reply by Marshall Harrison Mar 10.

Product Reviews

Merry Christmas r3

 Hi all Santa left me one under the tree the elf thar made it must have had a bad morning because one gray tab is metric and the other one is imperial help Santa what do I do

thanks Eric 

Posted by Eric Kershaw on January 8, 2019 at 6:27pm — 1 Comment

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 5 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am — 2 Comments

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.

The…

Continue

Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_