Kreg Owners' Community


The all-new System Organizer is the perfect place to store and organize all of your Kreg Joinery™ system parts — your Kreg Jig®, Kreg® Clamps, Kreg® Screws, drill and driver bits, and more. A portion of the Organizer’s tray can be removed for storage of other items such as the Kreg® Shelf Pin Jig, compact drills and drivers, and more.

It’s easy to keep track of everything stored in the System Organizer thanks to a transparent lid. A pair of heavy-duty clasps ensure that lid stays shut, and a large handle makes the Organizer easier to carry and take your Kreg® tools on the go.

The System Organizer has a custom-fitted insert to hold the following items:

  • 1 Kreg Jig® (K5, K4, or K3 model)
  • Kreg Jig® K5 Storage Wings
  • 4 Standard Stepped Drill Bits
  • 7 Standard 6" or 3" Square-Drive Bits
  • 3 Stop-Collar Hex Wrenches
  • Micro-Pocket™ Drill Guide Block
  • 2 Micro-Pocket™ Drill Bits
  • Kreg Jig® HD (Heavy-Duty)
  • Kreg Jig® HD Drill Bit
  • Kreg Jig® HD Square-Drive Bit
  • Kreg® Clamps
  • Up to 6 Kreg® Screw 100-count Containers


In addition, a portion of the Organizer’s tray can be removed for storage of other items such as:

  • Up to 6 Kreg® Screw 500-count Containers
  • Additional Clamps
  • Kreg® Shelf-Pin Jig
  • Compact Drills and Drivers


It’s easy to keep track of everything stored in the System Organizer, too, thanks to a transparent lid. A pair of heavy-duty clasps ensure that lid stays shut, and a large handle makes the Organizer easy to carry.


Learn More  |  Find a Dealer

 

Retails for $39.99 (U.S.)

Views: 1624

Reply to This

Replies to This Discussion

Just got this and think it's great. Love how I can keep everything in one place. That being said, it would have been nice for it to be just a little bigger to able to house the right angle clamps as well as the wood project clamps. You can get them in there but it forces a misalignment with the lid. 

Scott,

If you just have a small amount of clamps, they  store nicely in a 5gal bucket.

If I could put all the clamps, I use, in one container, I couldn't lift or carry it.

I store my all my clamps in a separate containers.

Each type in a separate bin and labeled accordingly.

Kreg klamps

Wood screw clamps

F Clamps

Spring Clamps

C-Clamps

Banding clamps

Pipe Clamps

Bar clamps.

Plus a variety of other smaller clamps.

WorksForMe.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

I have a problem with a k3 & k4

K3 problem the threaded insert is lose and will not hold setting. The k4 is worn and  hard to use. I was think maybe epoxy the insert in place may fix it. I tried wood glue did hold. Anyone else had the same problem? The k4 I have thought about…Continue

Started by Gary roofner in Beginners' Zone Mar 14.

Anyone using the Kreg Miter Gauge? 3 Replies

I'm thinking about getting the Kreg Miter Gauge instead of building a sled for my table saw. I figure the miter gauge would have more uses and since the stock will ride on the saw table there is no drop off like with some crosscut sleds. And it…Continue

Started by Marshall Harrison in Other Kreg® Products. Last reply by michael evans on Friday.

Pocket holes aren't deep enough 1 Reply

I'm having trouble getting my pocket holes deep enough. I'm using the kreg j4 system and using 3/4" stock 1 1/2" wide. I have set my jig to 3/4" high for the stock and set my drill bit to 3/4" to the tip. I'm pretty new at using this and I thought I…Continue

Started by JUSTIN RICHARDSON in Beginners' Zone. Last reply by Dave Johnson on Saturday.

Adaptive Cutting System 10 Replies

I really like the Adaptive Cutting System (ACS) and hope to buy it soon. My table saw really scares me as I have a bad knee that likes to buckle on me at inopportune times. I can just picture it happening at the table saw and tossing me into the saw…Continue

Started by Marshall Harrison in Beginners' Zone. Last reply by Marshall Harrison Mar 10.

Product Reviews

Merry Christmas r3

 Hi all Santa left me one under the tree the elf thar made it must have had a bad morning because one gray tab is metric and the other one is imperial help Santa what do I do

thanks Eric 

Posted by Eric Kershaw on January 8, 2019 at 6:27pm — 1 Comment

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 5 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am — 2 Comments

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.

The…

Continue

Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_