Kreg Owners' Community

Welcome to the Kreg Owners' Community!
 
This thread is the best place to introduce yourself and let other Community members get to know you. Please include your name, where you're from, your experience building with wood, why you joined this Community, and any other interesting facts about yourself. Also, feel free to share links to your blog, personal website, etc.

Once you've introduced yourself, be sure to check out Helpful Tips for New Members.

We hope that you find great use and enjoyment from the Kreg Owners' Community!

-KregRep

Views: 68697

Reply to This

Replies to This Discussion

Hi Ron,

I started off with the K5 system and a number of other little items, multi-mark, screw wheel, etc.  I have my eye on a couple of the Mobile Project Centers.  Just knocked out an 8' 4-tiers shelving unit for the garage last weekend.  All I had was the K5 jig system, a chop saw, tape measure (pencil), speed square and a drill.  Great little jig that K5.  Many improvements over the K4 and worth the money.

Mark

Hey Mark,

Thanks for the info. Will begin looking around for the best deal.

Mark Buono said:

Hi Ron,

I started off with the K5 system and a number of other little items, multi-mark, screw wheel, etc.  I have my eye on a couple of the Mobile Project Centers.  Just knocked out an 8' 4-tiers shelving unit for the garage last weekend.  All I had was the K5 jig system, a chop saw, tape measure (pencil), speed square and a drill.  Great little jig that K5.  Many improvements over the K4 and worth the money.

Mark

Hello everyone. Newbie here.

Cheers, Larita!

Larita P Willaims said:

Hello everyone. Newbie here.

Hello there! My name is Sebastian and I live in Cordoba, Argentina.

I have been into woodworking for almost 3 years, and it's both a therapy and help in the house. I recently bought a Kreg R3 but I'm strugling with purchasing the screws. I just got the chance to request some to a friend that is travelling in the US, but it sucks to have to use the drywall ones.

I'll post the pocket joinery projects as soon as I have them, thank you for adding me to the community!

Hello, My name is Larry Grimes. I'm a retired aircraft electrician. I moved from Oregon back to Missouri to the farm that I was raised on. I built a dome home from a kit here on the farm. I recently bought a Kreg K4 pocket hole jig, it works great. So I guess I've got the bug and doing a few simple projects to start with. I'm still a beginner though. That is why I here to learn what I can.

Hi, Joe Fleming here.  Born and raised in Des Moines, IA, but have lived in San Diego, CA for 31 years.  Studied engineering at Iowa State.  

I started out as a flat woodworker, but have been primarily a woodturner for almost 20 years.  I'm doing some carving now too. 

I have a project right now to build some partitions with plywood that can be disassembled once a year, and pocket hole joinery seems like a good solution.  That's why I'm here.  Joe

Double reply.  Sorry.



Roy Coulman said:

Hi, Jerry.  I hope you've been getting lots of use out of your K3 jig in the past year.

About the sandpaper problem, I've gone through that as well.  I used to have a small sign shop and made lots of signs out of Plexiglas, usually 1/8" or 1/4" thick.  After cutting the blanks to size on a panel saw or table saw, I would sand the edges smooth and slightly round the sharp edges and corners to prevent cuts.  I used a router and router table occasionally, but it left the edges as sharp as a knife and they still needed some sanding.  So my tool of choice was a drywalll sander with a large comfortable handle and a thin foam pad under the paper.  You can imagine how those sharp edges cut into the sandpaper, leaving it in shreds while the grit was still good.

Like you, I got fed up with the waste and looked for something to keep the backing intact.  Packing tape was the answer.  Plain ordinary carton packing tape.  I covered the back of the sheets with it, slightly overlapping the strips as I went.  That proved to be the answer.  The paper didn't shred at all and I was able to use each sheet until the grit was gone, far longer than the uncoated sheets used to last.  Hopefully this solution will work for you.  Roy.


This message was a reply to Jerry Gilles' message posted on June 1, 2016, on Page 216.  I don't know how it wound up at the bottom of this list.  Sorry.

Hi, My name is Gabe and I live at Bacchus Marsh, Australia. I have been woodworking for a few years and have been a fan of Kreg gear for a little while now. I have joined the community to source ideas and projects to keep me busy. I am also looking forward to meeting fellow woodworkers to share experiences and to have a good old chat. I have recently built a new work bench to fit in my small shop and will post a picture of it. 

Hope to see you out there!

Hi,

Alan here. Have been doing some basic woodworking over the years.... Just my way of relaxing. Love my Kreg Jig for joining my projects. I'm currently designing an A-Frame house for my retirement. I'm kind of curious if the joinery with a Kreg Jig would make for an easier, stronger build.... Just a thought for now. Would love to get any feedback from those more versed with what you can/can't do with a Kreg.

Take Care

Alan

Reply to Discussion

RSS

Need Help?

Technical Support is happy to help via phone or email. Call toll-free 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Product Reviews

Kreg Mobile Project Center

Posted by John Tomkinson on May 5, 2017 at 5:34am — 2 Comments

Handy jig to hold and push plugs in!

Posted by Dave Stanton on March 31, 2017 at 5:53pm — 1 Comment

Laguna 14BX Band Saw

Posted by Tim Grace on December 20, 2016 at 1:52am — 1 Comment

© 2017   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_