Kreg Owners' Community

Welcome to the Kreg Owners' Community!
 
This thread is the best place to introduce yourself and let other Community members get to know you. Please include your name, where you're from, your experience building with wood, why you joined this Community, and any other interesting facts about yourself. Also, feel free to share links to your blog, personal website, etc.

Once you've introduced yourself, be sure to check out Helpful Tips for New Members.

We hope that you find great use and enjoyment from the Kreg Owners' Community!

-KregRep

Views: 72151

Reply to This

Replies to This Discussion

thanks for the reply. I am probably over driving the screws. I think I may need some practice on scrap wood to get the technique down. I will also take a look at the charts with screw choices and material. 

Robert Brennan said:

Hello and welcome Sandra,

In relation to your question about screws poking through.

The reason screws may poke through relate to either being the incorrect size (too long) or you are overdriving them, (meaning drivig the heads into and beyond the bottom of the counterbore.

There is an easy way to check the length, after drilling put a screw in the pocket hole and check with the mating material how much penetration the screw tip has. (BTW you can Use similar scrap to do this test).

If all is good there they are being over driven.

Have a look at the Kreg charts on this site showing the screw choices  using screw with similar or dissimilar materials it may assist.

Hi Sandra!

I had this problem constantly since I am working in metric and thus had to adjust. My method is to set the stop collar on the drill bit 1/16" lower than it should be according to the charts. That makes the pocket hole bottom a bit higher and the tip of the screw which is going through the joint is shorter.

Based on my experience, it has zero impact on the joint strength, but it prevents any type of protruding (unless of course I am really driving the screw too far). 

Cheers!

Ed

Sandra Eynon said:

thanks for the reply. I am probably over driving the screws. I think I may need some practice on scrap wood to get the technique down. I will also take a look at the charts with screw choices and material. 

Robert Brennan said:

Hello and welcome Sandra,

In relation to your question about screws poking through.

The reason screws may poke through relate to either being the incorrect size (too long) or you are overdriving them, (meaning drivig the heads into and beyond the bottom of the counterbore.

There is an easy way to check the length, after drilling put a screw in the pocket hole and check with the mating material how much penetration the screw tip has. (BTW you can Use similar scrap to do this test).

If all is good there they are being over driven.

Have a look at the Kreg charts on this site showing the screw choices  using screw with similar or dissimilar materials it may assist.

HI, my name is Patrick.  I have been doing woodworking since high school shop class.  I have recently purchased the Kreg Jig to build a table and some cabinets.  I've made a variety of furniture from a china cabinet to a loft bed with a desk underneath.  I went from dowels to biscuits to now the Kreg. Although I build mostly small woodworking projects these days, I occasionally build some larger projects, and the Kreg will make it much easier and faster.

Hello all, just in the process of using my Kreg jig for the 1st time on a shoe rack.

Much needed, next up is a Buffet Table, but not sure wether to use MDF or Ply?

Looking forward to learning loads, making mistakes but enjoying myself.

Best wishes to everyone 

Steve

Hi, been a Kreg user since the beginning. Always had success with their jigs and will continue to use them.

Reply to Discussion

RSS

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

LED Lighting on mobile bench

Hi AllJust got myself a new Metabo mitre saw, kitted it out with a new Freud Pro blade as well as "pimped up" my bench with LED lighting so I can find stuff! I have 22 LED daylight tubes in my fittings in the garage so there is more than enough…Continue

Tags: blade, mitre, saw, lighting

Started by Steven Baynes in Miscellaneous Oct 8.

Ridgid tools 1 Reply

I originally bought Ridgid tools for the warranty, well I had to replace batteries. Very easy and got new batteries and chargers. Found out they don't make 24 volt tools any more, so I sent in a hammer drill, impact driver and light for replacement…Continue

Started by steve kidd in Beginners' Zone. Last reply by Glen S Oct 9.

Cabinets and the best wood choice for the carcass. 3 Replies

I am going to try and new project.  Never made cabinets before.  Researched and You-tubed like crazy.  So many opinions.  Mine are going to be:1 each= 30"W x 14"D x 38"H2 each =29"W x 14"D x 38"H1 floor to ceiling cabinet 18"W x 24"D and the height…Continue

Started by Stephanie H in Kreg Jig® Projects. Last reply by Glen S Oct 2.

1x6 into a 4x4? 4 Replies

Perhaps this question has already been asked somewhere on this forum but I wasnt able to find it after an hour or so of searching. Is there a recommended length of Kreg screw to use when combining a 1x6 into a 4x4 post. I have seen a few conversion…Continue

Tags: size, screw

Started by Dave N in Kreg Jig® Projects. Last reply by Edward Weitsman Sep 29.

Product Reviews

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.

The…

Continue

Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

Kreg K5 Jig Review

Posted by Daris R. on November 20, 2017 at 5:39pm

© 2018   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_